Problem with ISTA-D - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Problem with ISTA-D (/showthread.php?tid=27383) |
Problem with ISTA-D - msp23 - 31-08-2017 Hi @ all, i have a little problem with the last version. I can only diagnostic e model, f model ista say PAD is not active. What is PAD? big thx for help RE: Problem with ISTA-D - Bimmer540 - 31-08-2017 Use this tool: http://cartechnology.co.uk/showthread.php?tid=21543&highlight=node RE: Problem with ISTA-D - msp23 - 11-10-2017 Hi try everything but the tool doenst help . Can someone help me to slove this problem. It is only F-Models RE: Problem with ISTA-D - Bimmer540 - 11-10-2017 Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET Launch "C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe" to verify cable and connection are working. RE: Problem with ISTA-D - msp23 - 11-10-2017 But i do not have enet cable. I have icom RE: Problem with ISTA-D - Bimmer540 - 11-10-2017 (11-10-2017, 20:09 PM)msp23 Wrote: But i do not have enet cable. I have icom Okay, do you see Icom in ItoolRadar. Try on another Fxx. RE: Problem with ISTA-D - msp23 - 11-10-2017 Yes ItoolRadar ok, Exx no problem F i try 10 different all with this message. No ideas RE: Problem with ISTA-D - Bimmer540 - 12-10-2017 Do you have Enet-cable then you can try it. So You had no problems with previous version? Which Icom are you using? RE: Problem with ISTA-D - msp23 - 12-10-2017 Hi, no E-NEt cable. ICOM like on picture and no problems with previous version. RE: Problem with ISTA-D - Bimmer540 - 12-10-2017 (12-10-2017, 07:39 AM)msp23 Wrote: Hi, no E-NEt cable. ICOM like on picture and no problems with previous version. So i think you did something wrong with installing new version. Can you use previous version? And which version was it? |