+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Peugeot 207 1.4 v16 Bosch MEV17.4 (/showthread.php?tid=27508)
Peugeot 207 1.4 v16 Bosch MEV17.4 - bekiyu - 05-09-2017
Dear memebers,
I receive today one Peugeot 207sw 1.4 , engine code is 8FS, Bosch MEV17.4
vin : VF3WE8FSC34041052 , 2007 Petrol,in my garage, during the normal driving in the city it’s happened that the engine stopped immediately and don’t want to start after.
After scanning the ECU with Diagbox, I find some DTC’s , which I can’t delete.
Try to start engine with bot keys, and on immo dont have DTC.
On instrument, the Battery light flashing, and the BSI is in ECO mod.
DTC codes, stored in ECU :
P0135
P0130
P0053
P0011
P0054
P0053
Two monts ago, the O2 sensors are changed to new.
The owners explain me, that before this issue on the car its happened some times that on screen receive the “Antipollution Fault” message , and in this case when he switch off the ignition the cooling fan working several min.
If you have any idea please help me.
Thanks for your helping and efforts.
Best Regards
RE: Peugeot 207 1.4 v16 Bosch MEV17.4 - Le-Mans - 05-09-2017
(05-09-2017, 13:16 PM)bekiyu Wrote: Dear memebers,
I receive today one Peugeot 207sw 1.4 , engine code is 8FS, Bosch MEV17.4
vin : VF3WE8FSC34041052 , 2007 Petrol,in my garage, during the normal driving in the city it’s happened that the engine stopped immediately and don’t want to start after.
After scanning the ECU with Diagbox, I find some DTC’s , which I can’t delete.
Try to start engine with bot keys, and on immo dont have DTC.
On instrument, the Battery light flashing, and the BSI is in ECO mod.
DTC codes, stored in ECU :
P0135
P0130
P0053
P0011
P0054
P0053
Two monts ago, the O2 sensors are changed to new.
The owners explain me, that before this issue on the car its happened some times that on screen receive the “Antipollution Fault” message , and in this case when he switch off the ignition the cooling fan working several min.
If you have any idea please help me.
Thanks for your helping and efforts.
Best Regards
Hello,
how many kilometers or miles has the car?
use the diagbox or another diagnostic tool?
the cooling fan working several min because the car have problem don't worry about that the CPU give this command...
the p0011 fault puts me in thoughts because there is a possibility that the marks from the camshaft with the cranksaft are gone!
but the basic thing is to see the measurements through obd diagnostic tool
and first of all check the water temperature when the car is cold if its correct!
Sorry for mistakes
RE: Peugeot 207 1.4 v16 Bosch MEV17.4 - marianro2007 - 06-09-2017
Hi!
First of all check the camshaft position sensor itself and its electric circuit. Then charge or replace accumulator. After you may start de car have to deal with the other faults.
Regards!
RE: Peugeot 207 1.4 v16 Bosch MEV17.4 - iky786 - 06-09-2017
Check timing i sell theses engine all the day , after long cranking always jump timing, if timing is out replace timing chain & tensioner , also disconnect water temp sensor , if shorted may not start