+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: Problem reading 70F3353cc sg3 (/showthread.php?tid=27513)
Problem reading 70F3353cc sg3 - dj01fuc - 05-09-2017
Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
RE: Problem reading 70F3353cc sg3 - Shooting - 05-09-2017
(05-09-2017, 15:38 PM)dj01fuc Wrote: Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
Are you remembering to power the radio too....?
wbr
RE: Problem reading 70F3353cc sg3 - dj01fuc - 05-09-2017
(05-09-2017, 17:31 PM)Shooting Wrote:(05-09-2017, 15:38 PM)dj01fuc Wrote: Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
Are you remembering to power the radio too....?
wbr
yes
RE: Problem reading 70F3353cc sg3 - asto - 05-09-2017
(05-09-2017, 18:25 PM)dj01fuc Wrote:(05-09-2017, 17:31 PM)Shooting Wrote:(05-09-2017, 15:38 PM)dj01fuc Wrote: Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
Are you remembering to power the radio too....?
wbr
yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
RE: Problem reading 70F3353cc sg3 - dj01fuc - 05-09-2017
(05-09-2017, 18:36 PM)asto Wrote:(05-09-2017, 18:25 PM)dj01fuc Wrote:(05-09-2017, 17:31 PM)Shooting Wrote:(05-09-2017, 15:38 PM)dj01fuc Wrote: Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
Are you remembering to power the radio too....?
wbr
yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
RE: Problem reading 70F3353cc sg3 - dj01fuc - 07-09-2017
(05-09-2017, 18:51 PM)dj01fuc Wrote:(05-09-2017, 18:36 PM)asto Wrote:(05-09-2017, 18:25 PM)dj01fuc Wrote:(05-09-2017, 17:31 PM)Shooting Wrote:(05-09-2017, 15:38 PM)dj01fuc Wrote: Hello
i have a RCD 310 Bosch 1K0035186 AN with processor 70F3353cc sg3
i try to read procesor but i cant.
I use read pins from the attached picture
I do not know where the problem is about why it does not work,the reader is functional
I can get someone with a solution
thank you
Are you remembering to power the radio too....?
wbr
yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
RE: Problem reading 70F3353cc sg3 - dj01fuc - 08-09-2017
(07-09-2017, 19:33 PM)dj01fuc Wrote:(05-09-2017, 18:51 PM)dj01fuc Wrote:(05-09-2017, 18:36 PM)asto Wrote:(05-09-2017, 18:25 PM)dj01fuc Wrote:(05-09-2017, 17:31 PM)Shooting Wrote: Are you remembering to power the radio too....?
wbr
yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
(08-09-2017, 14:20 PM)dj01fuc Wrote:(07-09-2017, 19:33 PM)dj01fuc Wrote:(05-09-2017, 18:51 PM)dj01fuc Wrote:(05-09-2017, 18:36 PM)asto Wrote:(05-09-2017, 18:25 PM)dj01fuc Wrote: yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
I attach pictures with the RCD pattern
(08-09-2017, 14:20 PM)dj01fuc Wrote:(07-09-2017, 19:33 PM)dj01fuc Wrote:(05-09-2017, 18:51 PM)dj01fuc Wrote:(05-09-2017, 18:36 PM)asto Wrote:(05-09-2017, 18:25 PM)dj01fuc Wrote: yes
Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
(08-09-2017, 14:20 PM)dj01fuc Wrote:(07-09-2017, 19:33 PM)dj01fuc Wrote:(05-09-2017, 18:51 PM)dj01fuc Wrote:(05-09-2017, 18:36 PM)asto Wrote: Hi dj01fuc
before reading mcu push button for reset?max232 interface is ok?
BR asto
hello Asto
i cant read mcu, the interface is ok
I attach pictures with the RCD pattern