Chrysler EGR off - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Chrysler EGR off (/showthread.php?tid=27578) Pages:
1
2
|
Chrysler EGR off - 8baller - 07-09-2017 Does anyone have known working solution for EGR off + DTC I know ASC does not work for this ECU, and the solution attached leaves vehicle in limp Thanks EDC16CP31 3.0CRD RE: Chrysler EGR off - benii75 - 07-09-2017 Hello can you try this two solutions and report please checksum files before writting RE: Chrysler EGR off - 8baller - 08-09-2017 (07-09-2017, 21:41 PM)benii75 Wrote: Hello can you try this two solutions and report please checksum files before writting ASC doesnt work....? are these different RE: Chrysler EGR off - persix - 08-09-2017 Try. Only hysteresis maps changed. If car starts and work ok. Send error codes. RE: Chrysler EGR off - loki954 - 08-09-2017 Give this a go RE: Chrysler EGR off - 8baller - 08-09-2017 (08-09-2017, 11:21 AM)persix Wrote: Try. Only hysteresis maps changed. If car starts and work ok. Send error codes. the car start ok on the maps ive tried just in limp with no codes RE: Chrysler EGR off - persix - 08-09-2017 Can You view live data on diagnostic? What about EGR parameters and others. RE: Chrysler EGR off - mike_service - 08-09-2017 Hello the reason for limp mode are egr sensor,you have to bypass strategy and no more limp mode ! RE: Chrysler EGR off - ROD-BENDERS - 08-09-2017 Mike is right. He was the only one who could remove flaps and egr 100% on my jeep same ecu type every other solution brought lots of black smoke. RE: Chrysler EGR off - Remap Ross - 08-09-2017 I agree,,my solution for rod bender also smoked a bit..... |