307 BSI INSIDE 95160 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: 307 BSI INSIDE 95160 (/showthread.php?tid=2766) |
307 BSI INSIDE 95160 - eliasole - 27-02-2014 Hi , i need help , yesterday read bsi valeo ,with st95160 inside ,with conections like NYO 4 says. Tool is upa. Can you tell me if this dump is good, and if is ok, make 148000 km ? Try to do my self and car dont start and dash shows 0 km? Dash has nec inside make it 148000 km (i dont know why says 0?) I dont want to mess with dash again , i think i kill it if i desolder nec mcu again so please make 148000 on bsi. Thanks. RE: 307 BSI INSIDE 95160 - wahye - 27-02-2014 (27-02-2014, 08:15 AM)eliasole Wrote: Hi , i need help , yesterday read bsi valeo ,with st95160 inside ,with conections like NYO 4 says. Tool is upa. you must set your bsi to 0km with NYO4 , but be sure about version of your BSI , and put the value how you want to make on this car on dash !! any way try this file Regards RE: 307 BSI INSIDE 95160 - racin-snake - 27-02-2014 Download licznik and do the calc with that mate simple enough RE: 307 BSI INSIDE 95160 - pepesound - 27-02-2014 Upa read BSI wrong,did you try to read 3-4 times and compare records,here need to open the whole module and to remove memory to be safe RE: 307 BSI INSIDE 95160 - eliasole - 27-02-2014 Thanks for your answers , unfortunately i make one read ,put file in pbsi calc and when it gave me pin i thought it was ok and write back the mode one ,at confirm i saw the errors and my odyssey begin. finaly i open bsi desolder 95160 and with wires i have it on an eeprom socket at an easy place for solder desolder. Atm trying files RE: 307 BSI INSIDE 95160 - eliasole - 28-02-2014 Finally car start , make virgin and configuration from the beginning. Only the front electrical windows dont work. At rear have manual windows. Any idea? Thanks. RE: 307 BSI INSIDE 95160 - eliasole - 01-03-2014 Electric windows problem solved , no problem with bsi just wire.. Thanks a lot all of you for your help!! |