+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=20)
+--- Thread: Need help with Toyota Yaris hybrid 2013 P0A0F (/showthread.php?tid=27834)
Need help with Toyota Yaris hybrid 2013 P0A0F - Waliduk - 16-09-2017
Dear,
I need help with following fault code:
Toyota Yaris hybrid 2013
P0A0F
Engine starts and run then cut off.
Please provide me with the repair procedures.
Best Regards,
Waliduk
RE: Need help with Toyota Yaris hybrid 2013 P0A0F - IM6 - 16-09-2017
(16-09-2017, 16:09 PM)Waliduk Wrote: Dear,
I need help with following fault code:
Toyota Yaris hybrid 2013
P0A0F
Engine starts and run then cut off.
Please provide me with the repair procedures.
Best Regards,
Waliduk
Witch One
P0A0F-204
P0A0F-205
P0A0F-206
P0A0F-238
P0A0F-524
P0A0F-525
HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM: P0A0F-204, P0A0F-205, P0A0F-206, P0A0F-524, P0A0F-525; Engine Failed to Start
P0A0F-204 - Engine Failed to Start
P0A0F-205 - Engine Failed to Start
P0A0F-206 - Engine Failed to Start
P0A0F-524 - Engine Failed to Start
P0A0F-525 - Engine Failed to Start
DESCRIPTION
If an engine malfunction occurs, an engine malfunction signal is sent from the ECM to the power management control ECU (HV CPU). When the power management control ECU (HV CPU) receives this signal, it sets a DTC and performs fail-safe control.
image
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT (ENGINE AND ECT)
(a)Connect the Tech-stream to the DLC3.
(b)Turn the power switch on (IG).
©Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
(d)Check if DTCs are output.
Result:
image
HINT
If P0A0F-204, 205, 206, 524, or 525 is output even though the ECM has not detected a malfunction, there is a malfunction in the power management control ECU.
Turn the power switch off.B -- GO TO DTC CHART (SFI SYSTEM) See: A L L Diagnostic Trouble Codes ( DTC ) > Diagnostic Trouble Code Descriptions > Diagnostic Trouble Code Chart
A -- REPLACE POWER MANAGEMENT CONTROL ECU See: Power Distribution Module > Removal and Replacement > Components