+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ Problem with Ista P + ICOM A2 (/showthread.php?tid=27860)
Problem with Ista P + ICOM A2 - Cowboy - 17-09-2017
Hello! Ista P 3.62.2.003 when started with Loader V6.3Lite + ICOM A2, the clone starts searching for the VIN number and then shows the voltage below 12V when the power supply is connected or the car is running. Even when it finds Vin it displays the message that the interface is corrupt and can not make connections. ISTA+ 4.06.31, INPA and NCS work fine. What could be the problem? Thanks in advance for all the hints.
RE: Problem with Ista P + ICOM A2 - Loliceman - 17-09-2017
Update firmware on your Icom
RE: Problem with Ista P + ICOM A2 - Cowboy - 18-09-2017
Updated to 03-15-00 and the problem is still the same
RE: Problem with Ista P + ICOM A2 - atomantmk - 18-09-2017
Buy original ICOM or better clone.
Gesendet von meinem HTC 10 mit Tapatalk
RE: Problem with Ista P + ICOM A2 - Cowboy - 30-09-2017
Problem solved. When antivirus is turned off everything works as it should