Ford IDS 107.1 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Ford IDS 107.1 (/showthread.php?tid=27938) |
Ford IDS 107.1 - jamiem1987 - 19-09-2017 Hello, I noticed ford ids 107.1 is available on the following page, https://www.fordtechservice.dealerconnection.com/vdirs/wds/PCMReprogram/DSFM_PCMReprogram.asp?swproduct=IDS Does anyone have any success of it working? I tried to install it on my working vmware 106.06 machine and it will not load, it removes the old license and says i need to obtain a new license. Thank you. RE: Ford IDS 107.1 - mattydr67 - 20-09-2017 The v107.01 "killed" the old activation/patch It needs a new activation/patch. Good luck RE: Ford IDS 107.1 - votkarel - 25-09-2017 Also no calibration files available for it. RE: Ford IDS 107.1 - jamiem1987 - 11-10-2017 A couple of people are selling this on ebay and on garageforum claiming they have it working. Do you people reckon these are scams or is it worth a punt? Cheers RE: Ford IDS 107.1 - 788454 - 30-10-2017 A trial period is there? RE: Ford IDS 107.1 - scanner - 11-11-2017 HAVE A SERIAL CHINESE VCM2 31605352 VERSION 2.4.73.49 AUGUST 8 2017 THERE IS SOME CLONE IDS thanks RE: Ford IDS 107.1 - 788454 - 22-11-2017 What gives? the license is? RE: Ford IDS 107.1 - cardev - 08-12-2017 After installation of IDS SW V107, Firmware update starts and finish successful. When I connect the car, I can hear the relays clicking from the VCM-II clone, but no communication with car possible. With old IDS SW and old Firmware communication with car possible. Can anyone of you help? RE: Ford IDS 107.1 - chong5195 - 08-12-2017 (08-12-2017, 11:28 AM)cardev Wrote: After installation of IDS SW V107, Firmware update starts and finish successful. When I connect the car, I can hear the relays clicking from the VCM-II clone, but no communication with car possible. With old IDS SW and old Firmware communication with car possible. Can anyone of you help? hi friend how u make 107.01 run... can share |