+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Need original clear dump clio (/showthread.php?tid=28827)
Pages:
1
2
Need original clear dump clio - kingdomdz - 14-10-2017
Hi
Please who can make original clear dump for Clio 3 year 2006. the eeprom was totally faulty can't read it.
eeprom is 95160
8200 563 368
Bosch
0 285 001 510
AB9.X
thank you
RE: Need original clear dump clio - lalinhu - 14-10-2017
Here you go
thanks and rep
RE: Need original clear dump clio - kingdomdz - 14-10-2017
(14-10-2017, 16:56 PM)lalinhu Wrote: Here you goso i need only to change the vin ? right
thanks and rep
RE: Need original clear dump clio - lalinhu - 14-10-2017
I think it's not necessary but test.
RE: Need original clear dump clio - kingdomdz - 14-10-2017
Cannot communicate with airbag ecu. any help ?
RE: Need original clear dump clio - lalinhu - 14-10-2017
What are you reading with?
RE: Need original clear dump clio - kingdomdz - 14-10-2017
(14-10-2017, 19:04 PM)lalinhu Wrote: What are you reading with?
i already did many airbags. this is the first one that not work
i removed the old eeprom
flashed the new one with carprog and solder it again
with diag tool can't connect to airbag ecu
RE: Need original clear dump clio - CHIKODIAG - 14-10-2017
HI YOUR FILE
GOOD LUCK
RE: Need original clear dump clio - kingdomdz - 14-10-2017
(14-10-2017, 21:12 PM)CHIKODIAG Wrote: HI YOUR FILE
GOOD LUCK
is this file for 95160 ? should i modify the vin number ?
RE: Need original clear dump clio - CHIKODIAG - 15-10-2017
HI
it is 95160 and yes chaenge the vin
good luck