+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Carprog 5.46 " no response from unit" error (/showthread.php?tid=2888)
Carprog 5.46 " no response from unit" error - 14bogdan - 05-03-2014
Carprog 5.46 " no response from unit" error how can i fix it this error ? Thanks !
RE: Carprog 5.46 " no response from unit" error - ricky661 - 09-04-2014
(05-03-2014, 05:58 AM)14bogdan Wrote: Carprog 5.46 " no response from unit" error how can i fix it this error ? Thanks !
If you have a clone, you need to plug and unplug a few times for it to recognize the device or run a hardware test to see if the hardware is performing properly.
RE: Carprog 5.46 " no response from unit" error - Vlado ATM Chiptuning - 09-04-2014
Or A1cable is dead
RE: Carprog 5.46 " no response from unit" error - darek_naprawa - 09-04-2014
How did it happen that stopped working? Check quartz, power supply output voltage regulator and capacitor 47uF.
RE: Carprog 5.46 " no response from unit" error - hobao - 14-04-2014
I have a problem in my CARPROG give error seen in all operations.
The error and the following:no response from dash
Anyone ever had or know what it might be?
RE: Carprog 5.46 " no response from unit" error - dil6222 - 12-11-2016
Hello all I to get this error but only if I run d1 and a9 hardware test it fails with no response error if I run normal a9 test all is fine but if I run d1 a9 test
then try to run a9 after it gives this error for a9 test also I'm sure it used work but it's not working now. unplugging and plugging in again works and a9 test will work again but not D1 a9 test