+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Fiat - Alfa Romeo (https://cartechnology.co.uk/forumdisplay.php?fid=82)
+---- Thread: Fiat Multiecuscan v3.8 Full Registered (/showthread.php?tid=29167)
Pages:
1
2
Fiat Multiecuscan v3.8 Full Registered - obdstart - 23-10-2017
Fiat Multiecuscan v3.8 Full Registered Free for All
Inside is Install instruction..
Password: obdstart3_8fmes
EDIT: Added new link!
RE: Fiat Multiecuscan v3.8 Full Registered Free - QUICK SERVICE - 23-10-2017
Ok ok just write what year the car handles and where to buy cable, interface and what interface ?
RE: Fiat Multiecuscan v3.8 Full Registered Free - 23Andi23 - 23-10-2017
(23-10-2017, 20:21 PM)QUICK SERVICE Wrote: Ok ok just write what year the car handles and where to buy cable, interface and what interface ?Work with elm interface
RE: Fiat Multiecuscan v3.8 Full Registered Free - darek_naprawa - 23-10-2017
Work with elm interface and vag kkl.
RE: Fiat Multiecuscan v3.8 Full Registered Free - rs@chip - 23-10-2017
(23-10-2017, 20:28 PM)23Andi23 Wrote:(23-10-2017, 20:21 PM)QUICK SERVICE Wrote: Ok ok just write what year the car handles and where to buy cable, interface and what interface ?Work with elm interface
andy did you try conect to can-bus based modules with elm..previus version 3.7 with patch didnt work on can only k-line(interface passed all OK) while 3.1 works perfect on both k+can with my ori elm..thanks
RE: Fiat Multiecuscan v3.8 Full Registered Free - 23Andi23 - 24-10-2017
(23-10-2017, 23:29 PM)alex.eobd2 Wrote:(23-10-2017, 20:28 PM)23Andi23 Wrote:(23-10-2017, 20:21 PM)QUICK SERVICE Wrote: Ok ok just write what year the car handles and where to buy cable, interface and what interface ?Work with elm interface
andy did you try conect to can-bus based modules with elm..previus version 3.7 with patch didnt work on can only k-line(interface passed all OK) while 3.1 works perfect on both k+can with my oem elm..thanks
I am not sure what ecu´s we tried to connect when we used it but i will try it again this days if my friend with fiat have some minutes for me. i have 3.6 installed at the moment but will install 3.8 on other laptop too to test it
RE: Fiat Multiecuscan v3.8 Full Registered Free - QUICK SERVICE - 24-10-2017
So how does elm work properly? are all ok?
RE: Fiat Multiecuscan v3.8 Full Registered Free - rs@chip - 24-10-2017
(24-10-2017, 04:07 AM)QUICK SERVICE Wrote: So how does elm work properly? are all ok?
yes all ok..veri useful for remote programing on bcm and proxy align on newer fiats
RE: Fiat Multiecuscan v3.8 Full Registered Free - asto - 03-11-2017
Hi all
i tested this version 3.8 full patched and can bus not working same version 3.7,install back version 3.6 all working ok,have somebody this same error?cam help me about this problem?big thnx
BR asto
RE: Fiat Multiecuscan v3.8 Full Registered Free - rs@chip - 03-11-2017
(03-11-2017, 15:11 PM)asto Wrote: Hi all
i tested this version 3.8 full patched and can bus not working same version 3.7,install back version 3.6 all working ok,have somebody this same error?cam help me about this problem?big thnx
BR asto
yes mate can-bus not working...I switch back too..not sure where is the problem in softwere or patch