ISTA/P 4.08.1/P3.63.0 Release Notes - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA/P 4.08.1/P3.63.0 Release Notes (/showthread.php?tid=29331) Pages:
1
2
|
ISTA/P 4.08.1/P3.63.0 Release Notes - ingmv - 28-10-2017 Here are the ISTA/P 4.08.1/P3.63.0 Release Notes .... RE: ISTA/P 4.08.1/P3.63.0 Release Notes - BusyBox - 28-10-2017 Series I001, F001, F025, S15A, S15C can no longer be dealt with as of ISTA/P 3.63.0 ... RE: ISTA/P 4.08.1/P3.63.0 Release Notes - willisodhiambo - 28-10-2017 Doom for some of us who are still having problems carrying out programing with ISTA4. Seems Ill avoid upgrading until it is inevitable! RE: ISTA/P 4.08.1/P3.63.0 Release Notes - chang2 - 31-10-2017 Hello, here, the release notes: 3.63.0_4.08.1x in RUS RE: ISTA/P 4.08.1/P3.63.0 Release Notes - dracon - 31-10-2017 Has anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits. RE: ISTA/P 4.08.1/P3.63.0 Release Notes - unbrick - 31-10-2017 (31-10-2017, 16:11 PM)dracon Wrote: Has anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits. Enable expertmode: http://cartechnology.co.uk/showthread.php?tid=18065&pid=181606#pid181606 RE: ISTA/P 4.08.1/P3.63.0 Release Notes - dracon - 31-10-2017 (31-10-2017, 16:28 PM)unbrick Wrote:(31-10-2017, 16:11 PM)dracon Wrote: Has anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits. I don't believe that actually enabled the ability to remove control units from the programming plan. At least it didn't last time I tried it awhile back. RE: ISTA/P 4.08.1/P3.63.0 Release Notes - atomantmk - 31-10-2017 (31-10-2017, 16:11 PM)dracon Wrote: Has anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits. Use partial programming, with double click on module choose between coding, programming and no action. RE: ISTA/P 4.08.1/P3.63.0 Release Notes - pdc - 31-10-2017 When you choose software update and after finishing measures plan calculation you stay on confort tab, change for expert tab and there you can select or unselect the units that should be programmed or coded , then calculate again measures paln and you will see the choosen units plan to be programmed and/or coded. (31-10-2017, 16:52 PM)atomantmk Wrote:(31-10-2017, 16:11 PM)dracon Wrote: Has anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits. RE: ISTA/P 4.08.1/P3.63.0 Release Notes - BMWzone - 31-10-2017 Are available new version of ISTA/D & P, contain finger Print ? Anyway ISTA/P is 80 GB, I think that contain all psdzdata |