CarTechnoloGY
ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J (/showthread.php?tid=29657)

Pages: 1 2 3 4


ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - benyclaudiu - 07-11-2017

ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J
CID
sudo ./mmc64 prog_cid /dev/mmcblk0 094150415544492002108649f6010300
sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300


1 - Card EVO + (I tried 32G and 64G SD)

2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected)

3 - Install Ubuntu 32/64 (64's what I used)

4 - Copy local (Desktop linux) folder MMC

5 - open the copied folder and right cick -> "open terminal"

6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x".
If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64.
And the rights and check the "ll"

7 - Insert the SD slot. Terminal command "df" and verify the name card.
Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".

CID To read the original SD:
cat / sys / block / mmcblk0 / device / cid
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

8 - Order To change CID terminal:

- Linux 32 sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300


- Linux 64 sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300

After this command will display:
Writing new CID: sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300
Success! Remove and Reinsert SD card to check new CID.

These files do not contain the activation code, if someone has the activation code it can climb it here.


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - Dorin27 - 07-11-2017

Thanks for your work @benyclaudiu

But how work the activation if someone have older version of sd card?


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - alleshateinende - 08-11-2017

Can you seed please the torrent.
Thanks


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - number7 - 09-11-2017

Hi
How does the update proces looks like?
What do we need to do it first?
Update radio with file "RMC_EU_K13464_(A6-A7)"
then update "RMC_EU_K13464_(A1_Q3_A6_A7)"
then update "RMC_EU_K15028_(A1_Q3_A6_A7)" ??

I don't know why is update "RMC_EU_K13464_(A6-A7)" becouse I think RADIO update is already in "RMC_EU_K13464_(A1_Q3_A6_A7)". Am I wright?

Thanks for replay...


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - TeraBass - 09-11-2017

You can make update directly on newest version.


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - Dorin27 - 09-11-2017

Any news about activation of this card?


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - detlef12 - 10-11-2017

Hello benyclaudiu, thank you for sharing this map.
Are you tested this solution to activate the maps?
Is the map data or firmware modified?

best regards


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - chelnov - 10-11-2017

It is the data map.......


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - feargate - 16-11-2017

HI, TODAY I TRY UPDATE MY Q3 OK FIRMWARE BUT PUT SD AFTER 3 MINUTE NO MAP ACTIVE
I CHANGE CID TO SAMSUNG EVO BUT MAP DON'T WORK
WHY???
WHAT CAN I DO FOR IT???


RE: ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J - nikolina - 16-11-2017

(16-11-2017, 17:15 PM)feargate Wrote:  HI, TODAY I TRY UPDATE MY Q3 OK FIRMWARE BUT PUT SD AFTER 3 MINUTE NO MAP ACTIVE
I CHANGE CID TO SAMSUNG EVO BUT MAP DON'T WORK
WHY???
WHAT CAN I DO FOR IT???

No public solution for this. This is only firmware with map data but no activation. So there is two things that you can do....go to dealer for the activation or take the unit out and send it to some people who has the solution...itwasntme