DIAGBOX 7.76 peugheot 307 no comunication with engine ecu - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DIAGBOX 7.76 peugheot 307 no comunication with engine ecu (/showthread.php?tid=29726) |
DIAGBOX 7.76 peugheot 307 no comunication with engine ecu - johmn1978 - 09-11-2017 Hello i have buy diagbox 7.76 serrial number 921815C and it can comunication with all ecus but no with engine ecu to peugheot 307.I have test it to C2 and it workin fine. I have windows 7 32 please help.Thamks a lot This item https://www.aliexpress.com/item/Free-Ship-Lexia3-PP2000-Diagbox-V7-83-Lexia-3-Full-Chip-921815C-With-Original-Gold-Edge/32697338180.html?spm=a2g0s.9042311.0.0.sEts6l DIAGBOX 7.76 peugheot 307 no comunication with engine ecu - marianro2007 - 09-11-2017 Hi! It looks like there is an issue with k-line. First check the cable and the board for cold solder. RE: DIAGBOX 7.76 peugheot 307 no comunication with engine ecu - johmn1978 - 09-11-2017 I have read many interface is not working with peughet 307 i will look the gable but i cant open it.Thanks a lot RE: DIAGBOX 7.76 peugheot 307 no comunication with engine ecu - asto - 10-11-2017 Hi same not working chinese clone with p607 some ecus what tested orig without problems BR asto |