+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F01 Led Angel eye (/showthread.php?tid=30090)
F01 Led Angel eye - Qwerti - 21-11-2017
Hi!
I changed the the H8 bulb to led on f01. I tried coding but not success. When the ignition on works fine, but the engine start then 3-4s flashing, than switch off. Short circuit error coming in frm. How can i code this?
RE: F01 Led Angel eye - masa52 - 21-11-2017
You need to change parameters in frm ask google was a lot about that
RE: F01 Led Angel eye - srki7 - 31-12-2017
I think it was in U_parameter inFRM set to FF
RE: F01 Led Angel eye - benoos - 01-01-2018
FRM:
AE brightness to 100%
parking lights warm and cold monitor OFF
F01 Led Angel eye - bmwcoupè - 07-01-2018
In FRM Ecu
Pol_R and Pol_L warm and kalt Nicht Aktiv
Pol_R e Pol_L is led Aktiv
U_eff_pol —> 100%
Inviato dal mio iPhone utilizzando Tapatalk
RE: F01 Led Angel eye - samy_1985 - 19-11-2018
Hi, it worked for you the lines bellow?
In FRM Ecu
Pol_R and Pol_L warm and kalt Nicht Aktiv
Pol_R e Pol_L is led Aktiv
U_eff_pol —> 100%
U_parameter inFRM set to FF