Ista 4.08 problem with E-series! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Ista 4.08 problem with E-series! (/showthread.php?tid=30153) Pages:
1
2
|
Ista 4.08 problem with E-series! - Bimmer540 - 23-11-2017 Ista 4.08 problem with E-series. Fxx works perfect. From Ista 4.08 I have a problem with E-series incl K+Dcan cable and with Icom. When I start procedure it reads vin etc but after that is hangs on "see picture" and after a while it goes trough. With Icom it takes 2min to go trough this message. With K+Dcan and without NodeEdiabasVoltageControl V3 it takes 3min to go trough this message. With K+Dcan and with NodeEdiabasVoltageControl V3 it takes 5min to go trough this message. This ABL-GES function was not in 4.07 and that works without any problems with Exx and Fxx with Icom and K+Dcan cable . Is it possible to get rid of this message like FASTA!! Ista 4.08 problem with E-series! - atomantmk - 23-11-2017 I don't have a problem with the new version, it work like a charm. Gesendet von meinem SM-T585 mit Tapatalk RE: Ista 4.08 problem with E-series! - Bimmer540 - 23-11-2017 (23-11-2017, 11:34 AM)atomantmk Wrote: I don't have a problem with the new version, it work like a charm. Do you also have BLP in registry? RE: Ista 4.08 problem with E-series! - atomantmk - 23-11-2017 (23-11-2017, 11:38 AM)snypertje Wrote: Do you also have BLP in registry? RE: Ista 4.08 problem with E-series! - Bimmer540 - 23-11-2017 (23-11-2017, 11:45 AM)atomantmk Wrote:(23-11-2017, 11:38 AM)snypertje Wrote: Do you also have BLP in registry? Have you tride it on Exx? With Icom an K+Dcan? Ista 4.08 problem with E-series! - atomantmk - 23-11-2017 Yesterday with ICOM Next and everything was fine. Gesendet von meinem HTC 10 mit Tapatalk RE: Ista 4.08 problem with E-series! - Bimmer540 - 23-11-2017 (23-11-2017, 11:51 AM)atomantmk Wrote: Yesterday with ICOM Next and everything was fine. Can you post your ISTAGUI.exe And canyou post picture from: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold] RE: Ista 4.08 problem with E-series! - atomantmk - 23-11-2017 RE: Ista 4.08 problem with E-series! - Bimmer540 - 23-11-2017 (23-11-2017, 12:21 PM)atomantmk Wrote: Thanks. Do you have K+Dcan cable that you can try. Sorry I need ISTAGUI.exe.config Ista 4.08 problem with E-series! - atomantmk - 23-11-2017 I have never used K+DCan cable, with ISTA I'm using only ICOM. Gesendet von meinem HTC 10 mit Tapatalk |