+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW F32 - DME Fault code thrown due to "vehicle speed too high" (/showthread.php?tid=30302)
Pages:
1
2
BMW F32 - DME Fault code thrown due to "vehicle speed too high" - F32_PiccoloPiccolo - 27-11-2017
Hallo everyone,
as my car has the V-MAX removed and a stage 3 optimization, I tested the speed on a track as I was curious if my F32 435i could reach Alpina B4 "figures" or similar.
Everything is great except when I reach the "higher" speeds, the following fault code is thrown:
"DME 1B00A40 Driving Speed, plausibility: Vehicle speed too high".
I attached printscreens from ISTA+. Nothing is triggered within the cockpit (no engine lights or similar). However I noticed this as the car would kind of hang and go no further feeling some sort of a throttle. However as the data shows, all parameters are within range and well safe:
6000 rpm
Engine temp: 95 to 100 degrees
Am I interpreting it correctly if I say DSC is throwing the error? I am sure some of you experts can understand much better than me when checking the ISTA+ printscreens I attached.
I drove that with the DSC ON. This happens when the speed of 275 KM/h is exceeded.
Does BMW have some sort of a "block" at the 275 km/h which could cause this?
Any input, feedback is strongly appreciated.
Thank you in advance.
BMW F32 - DME Fault code thrown due to "vehicle speed too high" - darthur90 - 27-11-2017
The v-max was not removed, instead the value was raised. On my car it is raised to 300 km/h and i had no error when going with 285 km/h. Maybe the guy who modified the vmax value did something wrong.
Sent from my iPhone using Tapatalk
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - F32_PiccoloPiccolo - 27-11-2017
Thanks. I did not think or now the V-MAX could also be "raised". I was convinced it would be removed all together and then chance wants that some models do 5-10 km/h more than others.
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - temsky740 - 28-11-2017
Can u show your cafd from dme ?
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - F32_PiccoloPiccolo - 28-11-2017
(28-11-2017, 07:20 AM)temsky740 Wrote: Can u show your cafd from dme ?
Hi, find attached the CAFd structure from DME2 (DME). Please advise if more details about a specific position is needed?
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - temsky740 - 28-11-2017
Put here cafd
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - F32_PiccoloPiccolo - 28-11-2017
(28-11-2017, 15:36 PM)temsky740 Wrote: Put here cafd
Here it is, attached. File is zipped.
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - temsky740 - 28-11-2017
In your cafd max speed coded 320km\h.
If we see in ISTA - it speaks about dsc. I advice u to learn cafd dsc carefully about something like speed parametr. May be u will find something there .
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - F32_PiccoloPiccolo - 28-11-2017
Thank you.
Yes DSC seems the culprit according to ISTA+ but it is the max value of 275 km/h which is somewhat confusing. I asked a tuner if I should test V-MAX with DSC OFF and he said it doesn't matter. When V-MAX is removed completely and properly there is no reason for this to happen as according to him DSC does not play a role in this. I am still not sure if that is so.
RE: BMW F32 - DME Fault code thrown due to "vehicle speed too high" - temsky740 - 28-11-2017
Try to make control plan in ista on this mistake and see what ista will say