+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: EZS from MERCEDES VITO 2008 (/showthread.php?tid=30627)
Pages:
1
2
EZS from MERCEDES VITO 2008 - dime - 07-12-2017
I need help to change kilometers on this vehicle but I do not know which programmer I would use to read and write ezs. I have R270 and red rosfar. I look for a safer way to read/write the processor.
RE: EZS from MERCEDES VITO 2008 - jakesman - 07-12-2017
(07-12-2017, 17:16 PM)dime Wrote: I need help to change kilometers on this vehicle but I do not know which programmer I would use to read and write ezs. I have R270 and red rosfar. I look for a safer way to read/write the processor.personally I use xprog 5.5.5 never had problems with ezs or cas for BMW , I see a lot of guys say rosfarr kill it other say xprog kill it , I just go to options for xprog and make sure that check box for " read and verify " is NOT ticked and never had any problem
Sent from my HUAWEI Y560-L01 using Tapatalk
RE: EZS from MERCEDES VITO 2008 - dime - 07-12-2017
I try with red rosfar r260 and no communication. i have x-prog v5 with firmware for v5.5.1.
RE: EZS from MERCEDES VITO 2008 - mercis - 07-12-2017
(07-12-2017, 17:16 PM)dime Wrote: I need help to change kilometers on this vehicle but I do not know which programmer I would use to read and write ezs. I have R270 and red rosfar. I look for a safer way to read/write the processor.
r270 safe,but you must km self calc
i use fvdi for 9s12 dump calc
RE: EZS from MERCEDES VITO 2008 - nicotibi - 07-12-2017
ETL Programer work ok for this mask....
This mask is secured...
RE: EZS from MERCEDES VITO 2008 - sparky001 - 07-12-2017
I use VVDI prog.
Works great, very fast
Oh, Looks like it doesn't support that MCU...
Sorry
RE: EZS from MERCEDES VITO 2008 - sqlkarol - 07-12-2017
(07-12-2017, 20:03 PM)sparky001 Wrote: I use VVDI prog.
Works great, very fast
Oh, Looks like it doesn't support that MCU...
Sorry
Hi
VVDI works with this mask.
Look at EIZ-VITO(VIANO)(ST12)
RE: EZS from MERCEDES VITO 2008 - Dash_Burner - 09-12-2017
R270 works very good also. Tryed a few at the past with sucess.
RE: EZS from MERCEDES VITO 2008 - dodo34 - 05-06-2018
i read Vito W639 EZS with Digimaster 3.
the original mileage is 281275.
Can someone please change it to 240300 km
please i need the file back in YHS format as original one.
Thanks
RE: EZS from MERCEDES VITO 2008 - nek13 - 05-06-2018
I use jtag from the smok and it's ok, it has a calculator for km.