CarTechnoloGY
HELP! Need Dump 8L0920930F - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: HELP! Need Dump 8L0920930F (/showthread.php?tid=31454)

Pages: 1 2

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

Hi

Can please someone upload a dump from Audi A3 8L with Part number 8L0920930F.
Its a 93c86 Chip.

Virgin would be Perfect but any used dump is also ok.
Mine is currupted when i tried to read out Chip. Now Chip seems to be dead.

RE: HELP! Need Dump 8L0920930F - Crysis05 - 08-01-2018

(08-01-2018, 08:17 AM)zix1 Wrote:  Hi

Can please someone upload a dump from Audi A3 8L with Part number 8L0920930F.
Its a 93c86 Chip.

Virgin would be Perfect but any used dump is also ok.
Mine is currupted when i tried to read out Chip. Now Chip seems to be dead.

try this my frined

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

Wow, Thank you my friend

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

(08-01-2018, 08:42 AM)Crysis05 Wrote:  
(08-01-2018, 08:17 AM)zix1 Wrote:  Hi

Can please someone upload a dump from Audi A3 8L with Part number 8L0920930F.
Its a 93c86 Chip.

Virgin would be Perfect but any used dump is also ok.
Mine is currupted when i tried to read out Chip. Now Chip seems to be dead.

try this my frined


Do i have to change FIN? Or is it no Problem when i write used dump in Chip?

RE: HELP! Need Dump 8L0920930F - Karlos777 - 08-01-2018

Make procedure exchange of Cluster.
You need PIN from vehicle and PIN from dump.
http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_(Instrument_Cluster)

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

I think you missunderstood me.
I dont wanna change cluster in car. I only have corrupted dump when i tried to read out.

My question is if i have to change VIN from new dump, because i write it in my cluster.

RE: HELP! Need Dump 8L0920930F - Karlos777 - 08-01-2018

IMMO ID , Keys and VIN in cluster.
If you change manually in dump only ident VIN , car wont start.

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

I know but i cant adapt it before i dont get rid of the FUSE error on bench.

Its very hard to see but it says FUSE und shows milage in bottom.

[Image: b5bc6527617a727b0729a5203c874743.jpg]

RE: HELP! Need Dump 8L0920930F - darek_naprawa - 08-01-2018

Check the connection. You lack one plus.

HELP! Need Dump 8L0920930F - zix1 - 08-01-2018

I tried to make some better pics.

When I got the cluster I powered it on bench and everything was fine. I changed display and everything was still normal.
Then I desoldered eeprom to change milage. But dump war corrupted and empty. Now I have fuse error. Already tested new chips and different dumps.

[Image: 5302ea644c49ada56ca0d581328e29b1.jpg]
[Image: 83fe92cbf868eac7ded27a362eda351e.jpg]

When I power it on without eeprom chip the display works fine but whole cluster has no lighting. Already checked connection.