Diagbox VCI / XS Evolution interface Full Chip Mod - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: Diagbox VCI / XS Evolution interface Full Chip Mod (/showthread.php?tid=31544) |
Diagbox VCI / XS Evolution interface Full Chip Mod - ALC1 - 10-01-2018 Hi, I thought my VCI was full chip, but it doesn't talk to my C1, although it does talk to a friends 407, when i looked i think it's missing 10k resistor so i replaced it, but it still doesn't talk. Do I need to replace anything else? I am not an electrical engineer, but i can just about solder. 10k resistor soldered on: The other sides of the boards: Thanks RE: Diagbox VCI / XS Evolution interface Full Chip Mod - kmaverick - 10-01-2018 (10-01-2018, 16:07 PM)ALC1 Wrote: Hi, BTW on a C1 you have to manually enter the VIN as it's Toyota based so doesn't have the VIN in the BSI or any ECU. I have tested with the diagbox cable / software and all works. RE: Diagbox VCI / XS Evolution interface Full Chip Mod - ALC1 - 10-01-2018 (10-01-2018, 16:36 PM)kmaverick Wrote: BTW on a C1 you have to manually enter the VIN as it's Toyota based so doesn't have the VIN in the BSI or any ECU. I have tested with the diagbox cable / software and all works. Oh that's interesting, thanks, but I still tried manually putting in the VIN and no luck. |