Solved ✔ Audi A4 B8 2.0 KTAG problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ Audi A4 B8 2.0 KTAG problem (/showthread.php?tid=31575) |
Audi A4 B8 2.0 KTAG problem - BliZZar911 - 11-01-2018 Hey dudes, i have a problem. i read by Ktag the ecu EDC17CP20. All okay and after ecu build in. The car doesn´t start. I only read the ecu and its nothing damaged by ecu opening Diagnose says all Injectors(1-4) electrical fault in the circuit what can i do? please help me. flash the readed file? thank you RE: Audi A4 B8 2.0 KTAG problem - 8baller - 11-01-2018 And youre sure nothing was damaged? when ecu removed was keyfob pressed? RE: Audi A4 B8 2.0 KTAG problem - wajda3 - 11-01-2018 Check ecu connector I had a similar problem but in PCR2.1 i reconnect ecu and car start the plug was not well-packed RE: Audi A4 B8 2.0 KTAG problem - BliZZar911 - 15-01-2018 Problem is solved i cut a double transistor. is now re-soldered and vehicle starts. notice: Always open edc17 carefully and take 10 minutes more time. thank you RE: Audi A4 B8 2.0 KTAG problem - autoraedarum - 15-01-2018 Do you have made pictures from damaged transistor and can post it ? RE: Audi A4 B8 2.0 KTAG problem - BliZZar911 - 19-01-2018 Unfortunately, I didnt take any pictures. But it was a double trasistor which I have damaged with the cutterknife when opening the ecu. I think it's called "A7" on it. |