DTC Removal WinOLS - Newbie - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: DTC Removal WinOLS - Newbie (/showthread.php?tid=31619) |
DTC Removal WinOLS - Newbie - eliaskok - 12-01-2018 Hi all!! Am new to the world of car tuning so i would like to start first of all from DTC removal. I currently have the Kessy v2 and then winOLS(i know it's a difficult software to use especially when you are newbie but am confident that I can make it). Is there any formula that i can use to detect where i can find specific check engine code in the winOLS in case i want to disable it? for example P2626. I would really appreciate it your help to my first steps into the world of tuning. RE: DTC Removal WinOLS - Newbie - Zamperl - 14-01-2018 Search and watch on youtube, there a lot of WinOls movies. Good luck! RE: DTC Removal WinOLS - Newbie - zenter performance - 15-01-2018 .............I would really appreciate it your help to my first steps into the world of tuning. ............ Now is much easer then 10 yers ago ....good luck !!!!!!!!! RE: DTC Removal WinOLS - Newbie - pmroyal - 16-01-2018 (15-01-2018, 21:26 PM)zenter perforrmance Wrote: .............I would really appreciate it your help to my first steps into the world of tuning. ............ "Now is much easer then 10 yers ago ....good luck !!!!!!!!!" Yes good words..I start this job with K line interface via rs232 only ..now all is easer then 10 years ago RE: DTC Removal WinOLS - Newbie - donesko - 16-01-2018 Started with eprom programator and swaping chips RE: DTC Removal WinOLS - Newbie - eliaskok - 16-01-2018 (15-01-2018, 21:26 PM)zenter perforrmance Wrote: .............I would really appreciate it your help to my first steps into the world of tuning. ............ I'll keep that in mind then RE: DTC Removal WinOLS - Newbie - eliaskok - 17-01-2018 I tried to find tutorials for DTC off from edc16 but no luck. Can anyone help me with a tutorial or a link of a guide? Thank you. RE: DTC Removal WinOLS - Newbie - konstantin - 17-01-2018 If you want for vw edc16 search here for vag dtc remover http://cartechnology.co.uk/showthread.php?tid=13595&highlight=vag+dtc+remover RE: DTC Removal WinOLS - Newbie - eliaskok - 18-01-2018 (17-01-2018, 19:56 PM)konstantin Wrote: If you want for vw edc16 search here for vag dtc remover Hi Konstantin. Thank you very much, I already downloaded the software before but I just want to learn how to do it manually using WinOLS. |