Immo off golf 5 1,9tdi edc16 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Immo off golf 5 1,9tdi edc16 (/showthread.php?tid=31663) |
Immo off golf 5 1,9tdi edc16 - Nemanja - 13-01-2018 Hi all Does anyone have immo off picture for soldering and reading? Immo off with obd kess read isnt posible? Thanks Poslato sa ALE-L21 uz pomoć Tapatoka RE: Immo off golf 5 1,9tdi edc16 - 23Andi23 - 13-01-2018 (13-01-2018, 17:13 PM)Nemanja Wrote: Hi all You must read eeprom 95320 not possible with kess by obd RE: Immo off golf 5 1,9tdi edc16 - Nemanja - 13-01-2018 (13-01-2018, 17:27 PM)23Andi23 Wrote:What can be used for reading what tool?(13-01-2018, 17:13 PM)Nemanja Wrote: Hi all Many thanks! Poslato sa ALE-L21 uz pomoć Tapatoka RE: Immo off golf 5 1,9tdi edc16 - 23Andi23 - 13-01-2018 (13-01-2018, 17:29 PM)Nemanja Wrote: What can be used for reading what tool? What tools you have Simple eeprom programmer is enough if you open the ecu RE: Immo off golf 5 1,9tdi edc16 - Nemanja - 13-01-2018 (13-01-2018, 17:35 PM)23Andi23 Wrote:Kess ktag galleto v53 [FACE WITH TEARS OF JOY](13-01-2018, 17:29 PM)Nemanja Wrote: What can be used for reading what tool? So simple eprom programer can finish job Okay my friend many thanks! Poslato sa ALE-L21 uz pomoć Tapatoka RE: Immo off golf 5 1,9tdi edc16 - 23Andi23 - 13-01-2018 (13-01-2018, 17:36 PM)Nemanja Wrote:(13-01-2018, 17:35 PM)23Andi23 Wrote:Kess ktag galleto v53 [FACE WITH TEARS OF JOY](13-01-2018, 17:29 PM)Nemanja Wrote: What can be used for reading what tool? With KTAG you can read eeprom by bdm RE: Immo off golf 5 1,9tdi edc16 - darek_naprawa - 13-01-2018 Carprog_a1+,FVDI,Vag Dash Can by obd2. RE: Immo off golf 5 1,9tdi edc16 - kidloco - 13-01-2018 (13-01-2018, 17:38 PM)23Andi23 Wrote:No need to desolder epprom use ktag bdm frame done in 1 min hardest job is open ecu(13-01-2018, 17:36 PM)Nemanja Wrote:(13-01-2018, 17:35 PM)23Andi23 Wrote:Kess ktag galleto v53 [FACE WITH TEARS OF JOY](13-01-2018, 17:29 PM)Nemanja Wrote: What can be used for reading what tool? Poslano sa mog SM-T355 koristeći Tapatalk |