Solved ✔ Bmw e46 ms42 boot wont read - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ Bmw e46 ms42 boot wont read (/showthread.php?tid=31857) Pages:
1
2
|
Bmw e46 ms42 boot wont read - Nemanja - 19-01-2018 Hi I need boot pin location on this ms42 ecu , I have for ms43 picture with boot pin location but its not same Here a pictures if someone can mark pin o picture Thanks ! Poslato sa ALE-L21 uz pomoć Tapatoka RE: Bmw e46 ms42 boot pin location need - Enabled - 19-01-2018 Just use pin 24 of the AM29F400AB RE: Bmw e46 ms42 boot pin location need - bram380 - 19-01-2018 Boot pin ==>pin 24 FlashEPROM 29F400 or pin 104 SAK-C167CR MCU RE: Bmw e46 ms42 boot pin location need - Nemanja - 19-01-2018 (19-01-2018, 15:47 PM)bram380 Wrote: Boot pin ==>pin 24 FlashEPROM 29F400 or pin 104 SAK-C167CR MCUPin104 ? Poslato sa ALE-L21 uz pomoć Tapatoka RE: Bmw e46 ms42 boot pin location need - bram380 - 19-01-2018 Yes correct pin-104 RE: Bmw e46 ms42 boot pin location need - Nemanja - 19-01-2018 (19-01-2018, 17:28 PM)bram380 Wrote: Yes correct pin-104Thanks my friend Do you have xdf files for ms42 for share when I read ecu 512kb file and check softwareversion? For tuner pro need Poslato sa ALE-L21 uz pomoć Tapatoka Bmw e46 ms42 boot pin location need - Nemanja - 20-01-2018 First time booting this ecu so I cant get this ecu to boot mode Tell me if I do something wrong here instruction what I use for 512kb read http://www.autonumen.com/blog/2015/11/20/galletto-1260-ecu-flasher-readwrite-bmw-ms43ms42/ What I did : Connected all pins on ecu like on instruction I connected pin 7 and 26 on ecu ( power pins) then I connected on black socket + of galleto 1260 , then connect all them to 12v + battery Gnd pin 4 connected on ecu like on picture , I connected boot pin with gnd wire and on boot pin 104 , than connect all them to black socket minus ( - ) of galleto 1260 and on battery minus K line pin 32 connected on ecu like on picture , and on white socket K on galleto 1260 When I power this I have power on galleto light go on , after 6 sec I remove boot wire from pin like in instruction try to.connect and I got error ecu not in boot mode I use JM garage flasher like in instruction I do somethings wrong? Poslato sa ALE-L21 uz pomoć Tapatoka (19-01-2018, 17:28 PM)bram380 Wrote: Yes correct pin-104I.make mistake friend in connecting wires? If I made mistake please write me rught way for connection wires im bad in english Poslato sa ALE-L21 uz pomoć Tapatoka Bmw e46 ms42 boot pin location need - Nemanja - 20-01-2018 Anyone ? Poslato sa ALE-L21 uz pomoć Tapatoka Bmw e46 ms42 boot wont read - Nemanja - 20-01-2018 Maybe help Poslato sa ALE-L21 uz pomoć Tapatoka RE: Bmw e46 ms42 boot wont read - Enabled - 20-01-2018 Information: I just use a spring pin (POGO pin) on the boot pin.. no need to solder. |