+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Enet-Cable connection? (/showthread.php?tid=31995)
Enet-Cable connection? - Bimmer540 - 24-01-2018
I had it several times after diagnostic with Icom, connecting with Enet-Cable is hard after that. What can cause this problem?
When I connect the next day to the same car I had no problems with Enet-cable?
![[Image: anim-front.gif]](http://www.bmcoding.com/ebay/anim-front.gif)
RE: Enet-Cable connection? - Nackapatz - 24-01-2018
Which System you use?
RE: Enet-Cable connection? - Loliceman - 24-01-2018
(24-01-2018, 08:05 AM)snypertje Wrote: I had it several times after diagnostic with Icom, connecting with Enet-Cable is hard after that. What can cause this problem?
When I connect the next day to the same car I had no problems with Enet-cable?
When you connect ICOM to a car, the ZGW(FEM-GW/BDC) is given a IP-adress based on your ICOM DHCP setting.
What you need to do if you want to quickly swap to a ENET cable is either let the ZGW go to sleep (disconnect ICOM and let it fall asleep 10-20 min) or you could go into ISTA -> Service Functions -> Body, Voltage Supply -> Send power down command
Then you only have to wait 2-3 minutes for the car to fall asleep.
RE: Enet-Cable connection? - Bimmer540 - 24-01-2018
(24-01-2018, 09:12 AM)Nackapatz Wrote: Which System you use?
Windows 7 x64
RE: Enet-Cable connection? - masa52 - 24-01-2018
Got the same issue
leave the car for 10 min off and connect with enet cable again
RE: Enet-Cable connection? - Gregor - 24-01-2018
Or disconnect the battery for a few minutes.
RE: Enet-Cable connection? - masa52 - 24-01-2018
(24-01-2018, 10:25 AM)Gregor Wrote: Or disconnect the battery for a few minutes.
this is not good idea in this case
RE: Enet-Cable connection? - Nackapatz - 24-01-2018
For me the best solution is opening the Sharing for the Network, finding other Devices or turn off any firewall.
bg
Nacka
(24-01-2018, 09:43 AM)snypertje Wrote:(24-01-2018, 09:12 AM)Nackapatz Wrote: Which System you use?
Windows 7 x64