+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Learning chiptuning egr off edc16c34 psa (/showthread.php?tid=32045)
Learning chiptuning egr off edc16c34 psa - krisrider24 - 25-01-2018
Hello,
I d like to learn to modify maps. my first on an old ecu edc16c34 set in a peugeot 207 1.4hdi
i use a software egr remover to try to do this automatically but it was not a success.
i still have an egr command in diagbox the software detected four maps. i think that the work was not successful.
I d like to get help to find egr map with winols or ecm titanium. ols found 143 potentially maps.
if i can find all EGR map i can perform myself an egr off and check and compare by the same way the egr remover's work.
next tape try to perform an immo off once my ktag and bdm received.
i dump the flash with kess.
any advise about the whole chiptuning (software to use and hardware) will be welcome i am mechanic and i like to improve my knowledge
thanks
RE: Learning chiptuning egr off edc16c34 psa - donesko - 28-01-2018
Check file ....
RE: Learning chiptuning egr off edc16c34 psa - krisrider24 - 28-01-2018
I will try once my computer 's back
When I will try this I to winols if I turn these maps in 3d mode, could I see of which parameters these map depend of? For example:
Engine temperature, outdoor temperature engine rpm?
I know that egr command depend of these parameters but it is to realy understand what i do
Thanks again