+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: NEED Immo OFF for SSANGYONG KYRON (/showthread.php?tid=32072)
NEED Immo OFF for SSANGYONG KYRON - ILDIRA - 26-01-2018
Hi !!
I need help with ssanyong kyron 2.0DT-E4
the ecu is Delphi DCM3.2AP
A664 540 84 32
I attach the ori file read from 95320 (1001362) with eeprom programer
Thanks in advance ..
Regards
RE: NEED Immo OFF for SSANGYONG KYRON - ROD-BENDERS - 26-01-2018
(26-01-2018, 14:34 PM)ILDIRA Wrote: Hi !!
I need help with ssanyong kyron 2.0DT-E4
the ecu is Delphi DCM3.2AP
A664 540 84 32
I attach the ori file read from 95320 (1001362) with eeprom programer
Thanks in advance ..
Regards
here disconnect immo box write file and clear all DTC with diagnosis equipment
RE: NEED Immo OFF for SSANGYONG KYRON - volavka - 26-01-2018
NOTE: You must Write Protect the eeprom in setting while writing ,
for upa-usb use byte 8C in status register
Otherwise the immo jump back from MPC
Good luck
RE: NEED Immo OFF for SSANGYONG KYRON - ILDIRA - 26-01-2018
But is it read well or bad ???
because i read it with carprog 8.21
Regards
RE: NEED Immo OFF for SSANGYONG KYRON - ROD-BENDERS - 26-01-2018
(26-01-2018, 15:47 PM)ILDIRA Wrote: But is it read well or bad ???
because i read it with carprog 8.21
Regards
its ok
RE: NEED Immo OFF for SSANGYONG KYRON - ILDIRA - 26-01-2018
(26-01-2018, 15:27 PM)volavka Wrote: NOTE: You must Write Protect the eeprom in setting while writing ,
for upa-usb use byte 8C in status register
Otherwise the immo jump back from MPC
Good luck
not have upa ..
only carprog and i thing that no have option write protection
RE: NEED Immo OFF for SSANGYONG KYRON - ROD-BENDERS - 26-01-2018
(26-01-2018, 17:04 PM)ILDIRA Wrote:(26-01-2018, 15:27 PM)volavka Wrote: NOTE: You must Write Protect the eeprom in setting while writing ,
for upa-usb use byte 8C in status register
Otherwise the immo jump back from MPC
Good luck
not have upa ..
only carprog and i thing that no have option write protection
Try lift eeprom leg 7 and join to leg 8 after write file
RE: NEED Immo OFF for SSANGYONG KYRON - ILDIRA - 01-03-2018
Hi
i write with upa 1.3 use byte 8C in status register
delete all dtc and start ,work great ...
after stop car and wait 2 min the car start but have dtc error P1622 and not accelerate
i delete fault error and drive the car and no problem ,when the car stop before one min not have error but if wait 2-3 min or more its coming back the fault code ...
I do not know what to do !!!!
RE: NEED Immo OFF for SSANGYONG KYRON - perso69 - 02-03-2018
(01-03-2018, 17:43 PM)ILDIRA Wrote: Hi
i write with upa 1.3 use byte 8C in status register
delete all dtc and start ,work great ...
after stop car and wait 2 min the car start but have dtc error P1622 and not accelerate
i delete fault error and drive the car and no problem ,when the car stop before one min not have error but if wait 2-3 min or more its coming back the fault code ...
I do not know what to do !!!!
Try these files OFF. Your problem maybe CRC problem
Test the OFF1 first.