CarTechnoloGY
Mercedes w164 A/C problem - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Mercedes w164 A/C problem (/showthread.php?tid=32104)



Mercedes w164 A/C problem - spanaz1 - 27-01-2018

Hello techs,
am working on a Mercedes ml w164 Air-conditioning, its not getting cold and I have error P9006, I have changed A/C compressor but still the same,where can I look? or a wiring diagram may help.

thanks in advance.


RE: Mercedes w164 A/C problem - spanaz1 - 27-01-2018

I just found out that there is no auxiliary battery in the car, can this cause the non functioning A/C?


RE: Mercedes w164 A/C problem - MBENZTECH - 28-01-2018

Aux battery has nothing to do with a/c function. have you tried to actuate the compressor or have you performed compressor break in with SDS? What is the description of the code that your are getting? Is the code in AAC module, front sam?


RE: Mercedes w164 A/C problem - spanaz1 - 28-01-2018

No. its short circuit to A/C compessor


RE: Mercedes w164 A/C problem - leminhautotek - 28-01-2018

(28-01-2018, 06:30 AM)spanaz1 Wrote:  No. its short circuit to A/C compessor
if you have replaced ac compressor

check pin ( acc pushbutton control module) B. 26 to groundd ( 5-20 ohm)

and wrire from( acc pushbutton control module) to ac compressor > 3 ohm
replace acc module as picture
then adapt ac compressur

i have faced it


RE: Mercedes w164 A/C problem - spanaz1 - 28-01-2018

Thanks, I will test and report tomorrow

another question, does that wire from acc control mudule go straight to compressor?

another question, does that wire from acc control mudule go straight to compressor?

another question, does that wire from acc control mudule go straight to compressor?

another question, does that wire from acc control mudule go straight to compressor?

another question, does that wire from acc control mudule go straight to compressor?