CarTechnoloGY
Bmw x3 year 2012 change km - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Bmw x3 year 2012 change km (/showthread.php?tid=32612)

Bmw x3 year 2012 change km - manueldord - 11-02-2018

Hello mates need to change mileage in this car

bmw x3 year 2012

originals: 282704
change: 115000
eeprom: 95320

RE: Bmw x3 year 2012 change km - volavka - 11-02-2018

In dash mileage stored in eeprom 160dOqw not 95320
as well need to set new value in from Cas4

Good luck yes

RE: Bmw x3 year 2012 change km - manueldord - 11-02-2018

With what tool can I make this cas4 and eeprom 160dOqw

RE: Bmw x3 year 2012 change km - volavka - 11-02-2018

160dOqw for this kind of eeprom need eraser programmer such r270....etc
Cas4 you can do it by newest xprog fw

Good luck yes

RE: Bmw x3 year 2012 change km - bm92 - 11-02-2018

Or you can blank the first 32 bytes of 160DOWQ, set new value in CAS4, and the Kombi will take KM from CAS4

RE: Bmw x3 year 2012 change km - volavka - 12-02-2018

(11-02-2018, 17:02 PM)bm92 Wrote:  Or you can blank the first 32 bytes of 160DOWQ, set new value in CAS4, and the Kombi will take KM from CAS4

Hi mate
Are you sure about ?
Because FF FF is also km value , going till 1048560km so will appear in display 999999km even set low value in Cas4
by filling 1st 32 bytes with 00 00 becoming 0km ,
i guess you mean that's

Best Regards

RE: Bmw x3 year 2012 change km - bm92 - 13-02-2018

(12-02-2018, 02:38 AM)volavka Wrote:  
(11-02-2018, 17:02 PM)bm92 Wrote:  Or you can blank the first 32 bytes of 160DOWQ, set new value in CAS4, and the Kombi will take KM from CAS4

Hi mate
Are you sure about ?
Because FF FF is also km value , going till 1048560km so will appear in display 999999km even set low value in Cas4
by filling 1st 32 bytes with 00 00 becoming 0km ,
i guess you mean that's

Best Regards

Hi volavka, yes sure only "0" on the first 32 bytes because if "F", will have bad surprises yikes

I do all kombi this way and it works perfectly

Bmw x3 year 2012 change km - smilo - 15-02-2018

For all BMW F series, xprog will be useful for CAS (or FEM) to handle EEPROM ?
I have R270 that I use for Kombi, but never tried with CAS for F (Maybe also G series).
Also, R270 is unuseful with latest Kombi for F and G series.
Any help ?

RE: Bmw x3 year 2012 change km - manueldord - 15-02-2018

Hello partner someone has had good results with xprog clone 5.70 with cas4 (5M48H)


and if it is asin that pinout to followed


thanks and regards

RE: Bmw x3 year 2012 change km - bm92 - 21-02-2018

(15-02-2018, 23:38 PM)manueldord Wrote:  Hello partner someone has had good results with xprog clone 5.70 with cas4 (5M48H)


and if it is asin that pinout to followed


thanks and regards

Use VVDI, works very well for all bmw