CarTechnoloGY
(solved) Pinout program eeprom dash escalade - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: (solved) Pinout program eeprom dash escalade (/showthread.php?tid=32826)

(solved) Pinout program eeprom dash escalade - pietje001 - 17-02-2018

Hi.
around 2003 I think escalade/tahoe/Silverado has eeprom on inside of pbc..

I had pinout to solder wires to program eeprom but I lost it.
could someone upload for me?

thnx


// update:
thnx thats it!

RE: Pinout program eeprom dash escalade - Clusters - 18-02-2018

You mean 1999-2002 with the small board.

Program as 25020 or 95020

RE: (solved) Pinout program eeprom dash escalade - Stockshock - 27-03-2018

(18-02-2018, 01:10 AM)Clusters Wrote:  You mean 1999-2002 with the small board.

Program as 25020 or 95020

Just leave the other 2 wires disconnected while programming?

RE: (solved) Pinout program eeprom dash escalade - pietje001 - 27-03-2018

(27-03-2018, 20:41 PM)Stockshock Wrote:  
(18-02-2018, 01:10 AM)Clusters Wrote:  You mean 1999-2002 with the small board.

Program as 25020 or 95020

Just leave the other 2 wires disconnected while programming?

yes.. or you can stick them in your nose until it's done biggrin

RE: (solved) Pinout program eeprom dash escalade - Stockshock - 28-03-2018

(27-03-2018, 21:15 PM)pietje001 Wrote:  
(27-03-2018, 20:41 PM)Stockshock Wrote:  
(18-02-2018, 01:10 AM)Clusters Wrote:  You mean 1999-2002 with the small board.

Program as 25020 or 95020

Just leave the other 2 wires disconnected while programming?

yes.. or you can stick them in your nose until it's done biggrin

Ill do the latter! Lolgavel

RE: (solved) Pinout program eeprom dash escalade - Stockshock - 03-04-2018

(17-02-2018, 23:12 PM)pietje001 Wrote:  Hi.
around 2003 I think escalade/tahoe/Silverado has eeprom on inside of pbc..

I had pinout to solder wires to program eeprom but I lost it.
could someone upload for me?

thnx


// update:
thnx thats it!

What hardware/software are you using to program the chip while its still in circuit? I cant seem to get anything to work.

Thanks