+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: RNS850 How to do Conversion or Change Map From US to EU (/showthread.php?tid=32851)
RNS850 How to do Conversion or Change Map From US to EU - atomantmk - 18-02-2018
I want to do conversion from US to EU or will be good when only navigation map can be changed?
Can VCP do this job or region change can be done like on 3GP, from green menu.
Any information or DIY will be appreciated!
RE: RNS850 How to do Conversion or Change Map From US to EU - 13monc - 19-02-2018
With vcp you can do it
RE: RNS850 How to do Conversion or Change Map From US to EU - atomantmk - 19-02-2018
(19-02-2018, 11:04 AM)13monc Wrote: With vcp you can do itHow with VCP?
I have this zdc file: RNS850_670F.zdc or I need other zdc?
RE: RNS850 How to do Conversion or Change Map From US to EU - 13monc - 20-02-2018
Write by skype, i explain you
RE: RNS850 How to do Conversion or Change Map From US to EU - Navigationmaster - 21-02-2018
Yes that zdc will be fine
RE: RNS850 How to do Conversion or Change Map From US to EU - Michel R32 - 25-10-2018
after uploading this zdc container can i just install europe firmware? when i check eeprom content there is no european language after uploading zdc data date, and i don't know if i can use language string from an mmi3g in this unit? seems a little bit different?
RE: RNS850 How to do Conversion or Change Map From US to EU - Codieren - 26-10-2018
Enable Green menue set ignor Region install new Firmware and Second map
RE: RNS850 How to do Conversion or Change Map From US to EU - cultos - 07-05-2019
(25-10-2018, 10:09 AM)Michel R32 Wrote: after uploading this zdc container can i just install europe firmware? when i check eeprom content there is no european language after uploading zdc data date, and i don't know if i can use language string from an mmi3g in this unit? seems a little bit different?
need eeprom change language in hex editor like on Audi = or install EU firmware and all ?
RE: RNS850 How to do Conversion or Change Map From US to EU - eni16 - 01-11-2019
(26-10-2018, 17:18 PM)Codieren Wrote: Enable Green menue set ignor Region install new Firmware and Second map
Hi!
I set ignore region on green menu and start to update firmware with european firmware. It started updating, reboot several times but after some reboots rns stoped rebooting and now is just blank screen. I think is turned off. Also red lights around buttons(car, setup, nav etc) are off.
Can you help me please?