+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F56 LCI tail lights (union jack), FA/SA? (/showthread.php?tid=33455)
RE: F56 LCI tail lights (union jack), FA/SA? - bereic - 19-09-2018
would be interesting to know if there is an updated version of the EBA.
Because this one is from August.. meaning before the official launch.
I was also talking today with a Master Mechanician at my BMW Dealer and he has the issue that he was not able to run the "retrofit" section in ISTA for this retrofit. So selling parts without the ability to program the car is horrible for them. Now he opened a PUMA to get the adjusted FA to be able to program it. He will let me know if there is a HO-Wort added.
RE: F56 LCI tail lights (union jack), FA/SA? - Freddy1 - 19-09-2018
HELC gets accepted for F56 now, so I guess thats it, at least I could parse the FA in E-Sys, which wasn´t working (see my first posts), also NCD tools gives me a few values
RE: F56 LCI tail lights (union jack), FA/SA? - Freddy1 - 20-09-2018
Here is the newest version from 09/18
RE: F56 LCI tail lights (union jack), FA/SA? - osamu - 13-01-2019
I retrofitted Union Jack tail to F 56.
RE: F56 LCI tail lights (union jack), FA/SA? - grec0 - 11-02-2019
So have anyone installed them on a car with halogens?
RE: F56 LCI tail lights (union jack), FA/SA? - tokarszczak - 11-02-2019
Yes, 2016 JCW. All works ok.
RE: F56 LCI tail lights (union jack), FA/SA? - grec0 - 12-02-2019
You had to repin or something?
RE: F56 LCI tail lights (union jack), FA/SA? - tokarszczak - 12-02-2019
No, but have full led on front. HELC dont work for me, had to do that manual.
RE: F56 LCI tail lights (union jack), FA/SA? - Ibrahim24 - 04-06-2019
How does this need to be retrofitted on a non-LED version?
I can’t get the taillight flag to light up.
RE: F56 LCI tail lights (union jack), FA/SA? - gente - 04-06-2019
--> for a non front LED before LCI (until 03/2018) F56 connect Cable from PIN 1 to PIN 5 on right and left side.
--> for a non front LED after LCI F56 repin PIN 6 (isolate) and connect Cable from PIN 1 to PIN 6 on right and left side.
Then for both versions activate with ESYS the LED's from BL, FRA and BFD also the right and left one. As well you have to turn off in the same lights (BL, FRA, BFD) the monitors. Then reset error memory and done.
...look here.......
LG Thomas