CarTechnoloGY
Problem with adapter D1 carprog - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Problem with adapter D1 carprog (/showthread.php?tid=336)

Problem with adapter D1 carprog - nico - 15-10-2013

Hi to all

That I own a carpog in 4.01 that comes straight from China, I made the test connector to control carprog types A9 and the test passes with flying colors

Link.txt
File Type: .txt
Downloaded: 123 times
Size: 53 bytes


So far so good but when tested with the D1 puts me "NO RESPONSE FROM UNIT" when I connect the D1 and A9 with a +12 V power behind

have you ever perform this test or is my D1 has a problem

Thank you for your help

Nico

RE: Problem with adapter D1 carprog - djdanny - 20-10-2013

Carprog clone D1 never will be a good test. Work ok! Test fail!

RE: Problem with adapter D1 carprog - pictorino - 21-12-2013

I guess did you connect to car dashboard OBD2 directly, right?
Even with +12V sometime, on some cars is not possible to communicate with dash. Are overwrite protected. Only on desk.

RE: Problem with adapter D1 carprog - darek_naprawa - 18-02-2014

D1 przechodzi test w v4.74 w górę.W starszych programach był błąd.

RE: Problem with adapter D1 carprog - pictorino - 18-02-2014

(18-02-2014, 19:12 PM)darek_naprawa Wrote:  D1 przechodzi test w v4.74 w górę.W starszych programach był błąd.

Read this first! Especially point No.1:
http://garage-automotive.com/showthread.php?tid=245
readlearen