+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Bmw E90 CCC, CIC controller retrofit? (/showthread.php?tid=33603)
Bmw E90 CCC, CIC controller retrofit? - Kamcio - 12-03-2018
Is it possible to retrofit CIC iDrive controller to CCC Professional headunit? Can someone help me with this retrofit? 2005 E90
RE: Bmw E90 CCC, CIC controller retrofit? - Silva1337 - 12-03-2018
Yes possible, wire properly controller , update CCC soft to latest , and code ZBE type in CAPPL
RE: Bmw E90 CCC, CIC controller retrofit? - atomantmk - 12-03-2018
Look here how wires must be connected.
RE: Bmw E90 CCC, CIC controller retrofit? - mr_nitroz - 13-03-2018
After update CCC to latest SW version you need to load different ZUSB to gateway part of CCC.
RE: Bmw E90 CCC, CIC controller retrofit? - TomoR - 13-03-2018
(13-03-2018, 02:08 AM)mr_nitroz Wrote: After update CCC to latest SW version you need to load different ZUSB to gateway part of CCC.
Only on E60 ccc...on E90 not...allways is 9185555!!
RE: Bmw E90 CCC, CIC controller retrofit? - nack76 - 13-03-2018
My navi mask II i have active Rueko ... last software.
RE: Bmw E90 CCC, CIC controller retrofit? - Kamcio - 13-03-2018
(12-03-2018, 12:11 PM)atomantmk Wrote: Look here how wires must be connected.
I just have to change CANH with CANL?
RE: Bmw E90 CCC, CIC controller retrofit? - Impac - 13-03-2018
And you need to flash CGate with WinkFp to zb#9185626 and code Cappl—>ZBE—>LOW
RE: Bmw E90 CCC, CIC controller retrofit? - atomantmk - 13-03-2018
(13-03-2018, 11:25 AM)Kamcio Wrote:(12-03-2018, 12:11 PM)atomantmk Wrote: Look here how wires must be connected.
I just have to change CANH with CANL?
Yes and it will work every button on iDrive.
Bmw E90 CCC, CIC controller retrofit? - Kamcio - 13-03-2018
I did it without changing CANs. Just plugged the controller, flashed only Gateway to 9185555 and coded CAPPL to zbe low. Everything works ok
Wysłane z iPhone za pomocą Tapatalk