CarTechnoloGY
Generate CAFD without code and read - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Generate CAFD without code and read (/showthread.php?tid=33748)

Generate CAFD without code and read - smilo - 16-03-2018

Hi to all,

Can someone tell me if there is a solution to generate a CAFD for an ECU considering a specific FA - without coding ?
When we detect the CAF for a SWE in Esys, we have to code it to the ECU, then read coding data to be able to check the CAFD data. Is there a way or a tool that allow seeing the CAFD without coding then reading data from the ECU ?

RE: Generate CAFD without code and read - maxwell4321 - 16-03-2018

Of course, Tokenmaster NCD/CAFD tool and you can also use esys offline after you have read your Cafds

RE: Generate CAFD without code and read - larshutten - 16-03-2018

You can create .ncd with coding verification in esys

RE: Generate CAFD without code and read - smilo - 16-03-2018

Thanks guys -

(16-03-2018, 16:56 PM)maxwell4321 Wrote:  Of course, Tokenmaster NCD/CAFD tool and you can also use esys offline after you have read your Cafds
yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

(16-03-2018, 17:08 PM)larshutten Wrote:  You can create .ncd with coding verification in esys
I use this module (Coding-Verification) to check compatibility of CAFDs for a target ECU with its i-Level, but I don't how to generate a CAFD for a specific FA/SWE -

RE: Generate CAFD without code and read - Almaretto - 17-03-2018

(16-03-2018, 21:10 PM)smilo Wrote:  yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

You can use TAL-Calculation &/or E-sys Coding-Verification.

For Calculation: For Coding Verification
  • Load & Activate FA
  • Either Load SVT or use Verification by KIS and select desired options
  • Under settings: select SVT-Trace if you want SVT and NCD-Trace for CAFD's


RE: Generate CAFD without code and read - smilo - 17-03-2018

(17-03-2018, 02:51 AM)Almaretto Wrote:  
(16-03-2018, 21:10 PM)smilo Wrote:  yes of course I use very often NcdCafdTool, but how to generate a CAFD according to a target couple SWE/FA ?

You can use TAL-Calculation &/or E-sys Coding-Verification.

For Calculation: For Coding Verification
  • Load & Activate FA
  • Either Load SVT or use Verification by KIS and select desired options
  • Under settings: select SVT-Trace if you want SVT and NCD-Trace for CAFD's

Thanks ! it worked with Coding-Verification
I had to select a trace directory, otherwise generate NCD option is grayed