Good quality vcds vagcom clone - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Good quality vcds vagcom clone (/showthread.php?tid=33761) |
Good quality vcds vagcom clone - mystic8v - 16-03-2018 Hello, can anyone please advise me on a good, reliable HQ vcds hex can clone, I want to get a later version of the software but not sure what interface to buy with all the right chips,I can see there's a newer V2 clone but I'm not sure if it's any good, I know this has been a thread before but the links no longer work, please help, thanks. Regards RE: Good quality vcds vagcom clone - ZIPPO4594 - 21-03-2018 (16-03-2018, 13:29 PM)mystic8v Wrote: Hello, can anyone please advise me on a good, reliable HQ vcds hex can clone, I want to get a later version of the software but not sure what interface to buy with all the right chips,I can see there's a newer V2 clone but I'm not sure if it's any good, I know this has been a thread before but the links no longer work, please help, thanks. Clone V2 are very bad quality, and isn't V2 protocole. Only case is V2 buy a clone with Atmega162 chip. model/year of you car ? which language of VCDS do you need ? RE: Good quality vcds vagcom clone - alibabavl64 - 24-03-2018 Exist more of kinds of V2. One of them is with Atmega 162 and work like a HexCAN. RE: Good quality vcds vagcom clone - donesko - 24-03-2018 bought so far 3 china clones 17.8 from different sites, all are shit, 2 complete shit, 1 barely working RE: Good quality vcds vagcom clone - Lemta - 24-03-2018 (24-03-2018, 19:08 PM)donesko Wrote: bought so far 3 china clones 17.8 from different sites, all are shit, 2 complete shit, 1 barely working Is it the old interface or the new Hex-V2 you have bought? RE: Good quality vcds vagcom clone - kostas-k - 26-03-2018 I have bought a HQ genuine plan VCDS clone, which can be updated to latest official version, about double price of cheap clones and worths it. I always have latest official VCDS version Can't post link to website seller I suppose so I can sent using PM RE: Good quality vcds vagcom clone - alibabavl64 - 27-03-2018 Yesterday someone gave me a "V2 Atmega". In fact a HEX K+CAN. Work well. RE: Good quality vcds vagcom clone - dil6222 - 27-03-2018 Hello there is new 2018 clone with atmega162 and 18.2 software on eBay I will buy and test soon RE: Good quality vcds vagcom clone - kostas-k - 27-03-2018 (27-03-2018, 08:06 AM)dil6222 Wrote: Hello there is new 2018 clone with atmega162 and 18.2 software on eBay I will buy and test soon I can give link through PM where I bought it, tested it and works ok, even updated to latest version using genuine VCDS download link with atmega. I think it's better to buy through any site rather than Ebay, maybe on site the support is better because VCDS Loader needs activation, e.g.if you format your PC and install it again RE: Good quality vcds vagcom clone - dil6222 - 27-03-2018 (27-03-2018, 08:07 AM)kostas-k Wrote:(27-03-2018, 08:06 AM)dil6222 Wrote: Hello there is new 2018 clone with atmega162 and 18.2 software on eBay I will buy and test soon Yeah send it over cheers m8 I've personally never had an issue with eBay myself and I tend to only buy from UK sellers on there I'll send you link see what you think . Update: must of been good they all sold out lol |