+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: CGDI BMW Keytool Feedback (/showthread.php?tid=33808)
RE: CGDI BMW Keytool Feedback - koziol - 25-08-2018
so far i tried it to read ISN form MSV80 result OK
read and wright ISN cas 3 result OK
RE: CGDI BMW Keytool Feedback - Impac - 07-09-2018
Just did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully, when I started the car there was a Check Engine light i forgot to check the faults but just cleared them and all gone, now im im scratching me head what they were, anyone experienced that ?
RE: CGDI BMW Keytool Feedback - Impac - 08-09-2018
Did a 2008 E60 528i it asked for DownGrade it took around 10min no error codes this time all perfect key works
RE: CGDI BMW Keytool Feedback - Impac - 04-10-2018
2008 BMW E82 CAS3+ #9389115 Downgrade needed, after downgrade RED STEERING WHEEL SIGN no ignition even with original key, tried to reset ELV and it did not work, car dont start and no ignition on any key programming was successful to new key
These are the error codes
CAS
A0AA
A0AB
Red Steering Wheel sign tried to reset both with tool32 and nothing
Tool32
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_cas_loeschen[/font][/font]
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_elv_loeschen[/font][/font]
And from which i dont think its related
JBBF
C90B
C91E
Does that mean CAS WILL NEED NEW DUMP loaded on Bench ?
RE: CGDI BMW Keytool Feedback - ahmadarifai - 22-11-2018
(04-10-2018, 17:34 PM)Impac Wrote: 2008 BMW E82 CAS3+ #9389115 Downgrade needed, after downgrade RED STEERING WHEEL SIGN no ignition even with original key, tried to reset ELV and it did not work, car dont start and no ignition on any key programming was successful to new key
These are the error codes
CAS
A0AA
A0AB
Red Steering Wheel sign tried to reset both with tool32 and nothing
Tool32
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_cas_loeschen[/font][/font]
[font=.SF UI Text][font=.SFUIText]steuern_elvcounter_elv_loeschen[/font][/font]
And from which i dont think its related
JBBF
C90B
C91E
Does that mean CAS WILL NEED NEW DUMP loaded on Bench ?
NEED reset ELV counter thats it car will start also removing battery for few minutes will also work. all 2007 2008 2006 models will give this error.
try scan tool like launch or tool32 to reset
RE: CGDI BMW Keytool Feedback - Kenny - 30-12-2018
I think the tool has come a long way from the time i purchased it.
Yes its not perfect, but is there such thing as a perfect tool.
I have cloned FEM units f20, F30.
I have made up a fem units for cars that had them missing.
I have done a good few cas 3+ downgrade mode no problems.
Using F coding and programming i have coded 2nd hand units to the car and then ista accepts it in programming plan,(Previously rejected in plan) (Rem, lights etc.).
I have had one or two unsupported errors, but with further investigation i find its uncommon processor.
Then not even R270 reads it i have to use X-Prog.
For me the CGDI has been a great investment.
The functions are growing, updates all the time.
RE: CGDI BMW Keytool Feedback - lustek - 02-01-2019
I'm interesed to buy that tool.
What aboute additional authorization like:
- data modification and veryfication
- f series coding
It's good to have it too?
What aboute subscription or tokens. Is there something like that?
Or just we buy tool and using all functionality?
RE: CGDI BMW Keytool Feedback - rana - 02-01-2019
any one try CGDI to remove EGS ISN and if working fine?
RE: CGDI BMW Keytool Feedback - Adel75 - 23-01-2019
hi
any one try CGDI to remove EGS ISN and if working fine?
I m interested to know if it can make 6hp and 8 hp virgin ?
regards
Adel
RE: CGDI BMW Keytool Feedback - willisodhiambo - 30-01-2019
(25-08-2018, 23:47 PM)koziol Wrote: so far i tried it to read ISN form MSV80 result OK
read and wright ISN cas 3 result OK
I have been thinking of this tool instead of Autohex. But only if it can read 128bit ISN from other DMES. Can it do more DMEs than just MSV80, even if on bench? I just need a tool that can read ISNs from DMEs so I can write the same to CAS3 or CAS4 or FEM/BDC