ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi (/showthread.php?tid=34028) |
RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - sixela - 29-11-2018 inside etka in settings it has blank for id/username/pass which are? RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - keytronik - 29-11-2018 (29-11-2018, 00:54 AM)vitorvitamina Wrote:(29-11-2018, 00:19 AM)padletut Wrote: First I updated VW data to ver. 1253, worked like charm Hi, can you MP me this loader too ? Thanx RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - firarda - 29-11-2018 (29-11-2018, 00:54 AM)vitorvitamina Wrote:(29-11-2018, 00:19 AM)padletut Wrote: First I updated VW data to ver. 1253, worked like charm had the same issue. could you PM the same to me? thanks RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - Carmechanic - 29-11-2018 I have the following error even though I changed the INI files IniFile: the C: \ ETKA \ Prog \ etka_vw.ini UserIni: MsgTextclient (the C: \ ETKA \ Prog \ etka_vw.ini) click OK and then takes off another error: No Ini for Provide press OK then another error crashes: No USER-INI click OK, then another error crashes: CDS file not found: C: \ ETKA \ Prog \ Modell7.cds Could you please help RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - lukasko144 - 30-11-2018 (28-11-2018, 21:51 PM)bobos200 Wrote:(27-11-2018, 22:27 PM)firarda Wrote:(26-11-2018, 21:29 PM)lukasko144 Wrote: I didn't need copy data to Prog1 , Prog2 and so on (win 7 32 bit). Only install file ETKA81_Installation.exe (190762248 bytes) to Etka 8.0 and all is functional, also updates till 1252. It was automatically downloaded after click on button Install ETKA 8.1. RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - phalbasch - 02-12-2018 Thanks for sharing, havent used ETKA since ETKA5! RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - veedabowlu - 03-12-2018 (28-10-2018, 19:18 PM)James1234 Wrote: but after a successfull upgrade to 8.1 and Audi-updates I am getting a message all the time: MFC application ETKA doesn't work anymore. I tried the installation at least ten times and it ended with this message. I Jumped thru all of the hoops... managed to upgrade to 8.1 and get the Audi updates to work... program was running... And updating Seat & Skoda... then it said something along the lines that PROG was already in use and needed to close to update... I closed ETKA 8.1, and I am also getting a quick pop up window "MFC-Anwendung ETKA has stopped working" and the window disappears, AND the program never runs... Anybody figure out a solution for this?? RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - IMKO - 04-12-2018 (03-12-2018, 17:49 PM)veedabowlu Wrote:(28-10-2018, 19:18 PM)James1234 Wrote: but after a successfull upgrade to 8.1 and Audi-updates I am getting a message all the time: MFC application ETKA doesn't work anymore. I tried the installation at least ten times and it ended with this message. Just do same thing as in post #178 the copy fix from ix/prog it worked for me RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - veedabowlu - 04-12-2018 Well, I followed "post #178"... When I click on the new " EtStartn.exe" new shortcut, i literally get a SMALL window to pop up and them it disappears... I dont even get a chance to read what the window says... remember, "I managed to upgrade to 8.1 and get the Audi updates to work... program was running..." and then it FORCED me to close it to continue updating it... now it does not open at all Help? RE: ETKA 8 [Germany + International] v2018 32/64Bit + Latest Updates - VW/Seat/Skoda/Audi - szaron844 - 04-12-2018 Use WINRAR or 7-ZIP to decompress the Files or you'll get "Wrong Password" Error ! |