Solved ✔ MED17 immo transfer - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ MED17 immo transfer (/showthread.php?tid=34483) |
MED17 immo transfer - ltujustas - 05-04-2018 Hi, I have transfered immo med17 old ecu to the new ecu with tango, but bcm2 have error that need immo adaptation. How I can do that immo adaptation ? On cluster SAFE car doesnt want to start. I have tried immo off with tango but doesnt work. RE: MED17 immo transfer - volavka - 05-04-2018 Post dumps of original and donor ecu also cloned eeprom by tango Good luck RE: MED17 immo transfer - ltujustas - 05-04-2018 (05-04-2018, 11:27 AM)volavka Wrote: Post dumps of original and donor ecu first ori second donor tango eeprom RE: MED17 immo transfer - volavka - 05-04-2018 Write eeprom to donor ecu and let us know how you get on RE: MED17 immo transfer - ltujustas - 05-04-2018 Thanks, everything works RE: MED17 immo transfer - car_tech - 22-05-2018 (05-04-2018, 12:09 PM)volavka Wrote: Write eeprom to donor ecu and let us know how you get on Hello volavka, I have a VW Golf 2,5L TFSI CBU, ECU# 07K906055AG with ME17.5. The old ECU keeps setting fault code 00808(P0328) even with new KS sensor(G61) replacement. I need to fix this car by changing the ECU with a used one(same part number as the old ECU). Can you help me transfer Immo code/VIN number to the replacement ECU so I can start the car? If the Immo code can not be transferred, please just transfer the VIN number & set the Immo OFF so I can start the car. Both flash files were retrieved by using Galletto 4. Thanks in advance! RE: MED17 immo transfer - volavka - 23-05-2018 eeprom area from old/new ecu are needed answell RE: MED17 immo transfer - car_tech - 23-05-2018 (23-05-2018, 00:19 AM)volavka Wrote: eeprom area from old/new ecu are needed answell How do I read the eeprom area? Galletto 4 SW didn't have a selection for eeprom area, only the whole flash option. Do I need need another tool to do this? Or there was another way to read eeprom with Galletto 4 SW which I didn't know! Thanks for quick replying. RE: MED17 immo transfer - ROD-BENDERS - 23-05-2018 (23-05-2018, 06:32 AM)car_tech Wrote:(23-05-2018, 00:19 AM)volavka Wrote: eeprom area from old/new ecu are needed answell Read bootmode all files |