CarTechnoloGY
E65 Cas1 RIGH HAND - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: E65 Cas1 RIGH HAND (/showthread.php?tid=34624)

Pages: 1 2 3


E65 Cas1 RIGH HAND - Silva1337 - 09-04-2018

Hello guys have cas1 from right hand car, need connections for vvdi, only avalaible for left hand carsnerd


RE: E65 Cas1 RIGH HAND - dil6222 - 09-04-2018

(09-04-2018, 10:33 AM)Silva1337 Wrote:  Hello guys have cas1 from right hand car, need connections for vvdi, only avalaible for left hand carsnerd

Hello doesn't vvdi already have this diagram ?
Post picture of circuit board from cas and I will help smile
Also find mcu mask as can work out pinout with that.


RE: E65 Cas1 RIGH HAND - Silva1337 - 09-04-2018

there is my cas , vvdi has for left handed not suitible for my scenarioyikes


RE: E65 Cas1 RIGH HAND - Silva1337 - 09-04-2018

i dissabmled cas its 0L01Y mask


RE: E65 Cas1 RIGH HAND - fifii69 - 10-04-2018

(09-04-2018, 21:06 PM)Silva1337 Wrote:  i dissabmled cas its 0L01Y mask



check this


RE: E65 Cas1 RIGH HAND - Silva1337 - 10-04-2018

not working ://////
or maybe im choosing not correctly in vvdi
cause cas1 in vvdi only with :
Mask:0K50E
Mask:5H55W
i tryed and anotther ones where that mask is present

if i read through mcu pins i get only ID 0000


RE: E65 Cas1 RIGH HAND - dil6222 - 11-04-2018

(10-04-2018, 20:10 PM)Silva1337 Wrote:  not working ://////
or maybe im choosing not correctly in vvdi
cause cas1 in vvdi only with :
Mask:0K50E
Mask:5H55W
i tryed and anotther ones where that mask is present

if i read through mcu pins i get only ID 0000

Hello you have xprog? smile


RE: E65 Cas1 RIGH HAND - Silva1337 - 11-04-2018

No i dont , btw i have codiprog i tryed read throug mcu pin i get error message that mcu locked and id 0000 i also tryed to connect to mcu as secured trhough vvdi


RE: E65 Cas1 RIGH HAND - dil6222 - 12-04-2018

(11-04-2018, 19:27 PM)Silva1337 Wrote:  No i dont , btw i have codiprog i tryed read throug mcu pin i get error message that mcu locked and id 0000 i also tryed to connect to mcu as secured trhough vvdi

Mcu is most definitely secured/locked so you need programmer that can bypass security decent xprog will read or upa original with correct scripts xprog is cheapest option smile


RE: E65 Cas1 RIGH HAND - Silva1337 - 12-04-2018

its strange why vvdi cant do it ? mm?