+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: EDC17CP14 write with Kess protocol 501 (/showthread.php?tid=34786)
EDC17CP14 write with Kess protocol 501 - premium89 - 14-04-2018
Hello mates!
Did anybody wrote succesfully an EDC17CP14 irom build after 09/2009 with EU kess 5.017 clone using protocol 501 (Ksuite 2.32)?
I know, the newer ecu have tprot, but i am asking because there are no warnings in the Kess-Help docs using this new protocol.
I have also a full backup of this Ecu from before, can i restore it after if anything goes wrong?
Thanks in advance for advices.
RE: EDC17CP14 write with Kess protocol 501 - kiruxxx - 14-04-2018
u have backup by obd2? or in boot mode? In boot mode I have wroted and its works perfect. I my friend we wrote by obd audi q5 and everything ok
RE: EDC17CP14 write with Kess protocol 501 - premium89 - 14-04-2018
I have backup by boot with ktag. I tuned this car before also by boot and everything ok. Now i have to do an dtcoff and ask if its possible by obd with this new protocol 501. i ask because i dont want to disassemble this ecu again and if some have expierence with this.
RE: EDC17CP14 write with Kess protocol 501 - autoraedarum - 14-04-2018
Have wrote a 03L906022RN EDC17CP 14 with TP V7.0 with Protocoll 501 sucessfull, but i tried it only on my test ECU, on real car i dont try it until now
But if you have full backup, you can restore it.
RE: EDC17CP14 write with Kess protocol 501 - premium89 - 14-04-2018
Friends, the operation succeeded! I wrote succesfully with protocol 501, during the process, the car fan run at full speed, so you have to attach a good charger!
Ecu ID is:
1037563957_03L906022QG 9978
VW passat CC 170HP CBB engine.
RE: EDC17CP14 write with Kess protocol 501 - rs@chip - 14-04-2018
(14-04-2018, 18:11 PM)premium89 Wrote: Friends, the operation succeeded! I wrote succesfully with protocol 501, during the process, the car fan run at full speed, so you have to attach a good charger!
Ecu ID is:
1037563957_03L906022QG 9978
VW passat CC 170HP CBB engine.
I sucesfuly write EDC17cp14 2011 year..those ecus with IROM/XROM sometimes fail at 99% and stay in programing mode..but with 501 prt this is solved.Important is like you say good charger and I iven pul fuse for fan
RE: EDC17CP14 write with Kess protocol 501 - playaz187 - 19-12-2018
i ll give it a try on new 501 protocol got an audi q5 2009 with edc17cp14 SW: 1037500120 03L906022NH 4388 i will try by ODB