Bmw F01 740d 2011 VDM fault and stability warning - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Bmw F01 740d 2011 VDM fault and stability warning (/showthread.php?tid=35117) |
bmw F01 740d 2011 VDM fault and stability warning - iyade46 - 25-04-2018 bmw F01 740d 2011 VDM fault and stability warning 480C0A Direction Valve, position implausible 480BCA Switching-position sensor , signal too low what can make that? RE: Bmw F01 740d 2011 VDM fault and stability warning - mike1 - 29-04-2018 Check the wiring between control unit and valve block. Check the control unit itself. If wiring and control unit are ok, replace valve block itself. |