+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: 2008 BMW 7 series DME 7 Cloning need help (/showthread.php?tid=36199)
2008 BMW 7 series DME 7 Cloning need help - koziol - 08-06-2018
2008 BMW 7 series DME 7 Cloning need help
can someone guide me with pin out
and what tool is capable of doing this
RE: 2008 BMW 7 series DME 7 Cloning need help - PhilipM - 08-06-2018
You can read this with BDM and copy everything across.
Virtual eprom is in the flash
RE: 2008 BMW 7 series DME 7 Cloning need help - koziol - 08-06-2018
I cant see this module in my K-tag clone
RE: 2008 BMW 7 series DME 7 Cloning need help - PhilipM - 08-06-2018
I think it should be a normal Bosch BDM pad.
You might need to give 5v to the write protect pin on the flash if it gives you a write error.
RE: 2008 BMW 7 series DME 7 Cloning need help - koziol - 08-06-2018
what should i chose in K-tag?
RE: 2008 BMW 7 series DME 7 Cloning need help - Enabled - 08-06-2018
That one is ME 9.2
RE: 2008 BMW 7 series DME 7 Cloning need help - Alex_Tushino - 08-06-2018
(08-06-2018, 18:25 PM)koziol Wrote: what should i chose in K-tag?
reading full
(08-06-2018, 18:07 PM)koziol Wrote: I cant see this module in my K-tag clone
k-tag is ok for this dde