Programming new ECU for Ford Fiesta 2004 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Programming new ECU for Ford Fiesta 2004 (/showthread.php?tid=36603) |
Programming new ECU for Ford Fiesta 2004 - llavemg - 22-06-2018 Hey guys, How can I program a new ECU for a Ford fiesta 2004 using IDS? RE: Programming new ECU for Ford Fiesta 2004 - IM6 - 22-06-2018 (22-06-2018, 02:14 AM)llavemg Wrote: Hey guys, IF you IDS is Active now is IDS 109 RE: Programming new ECU for Ford Fiesta 2004 - hasoon2000 - 22-06-2018 Use PMI in IDS. It'll find the VIN number from the other modules and flash the firmware. Then, go into PATS. Do a parameter reset and program 2 keys. Make sure to have at least 2 working keys or else it won't work. RE: Programming new ECU for Ford Fiesta 2004 - llavemg - 22-06-2018 (22-06-2018, 03:23 AM)IM6 Wrote:(22-06-2018, 02:14 AM)llavemg Wrote: Hey guys, I have IDS v86. It can works or I need to upgrade? RE: Programming new ECU for Ford Fiesta 2004 - flamuri - 22-06-2018 if you have ids v86 and calibration file good job if you have ids v86 and calibration file good job RE: Programming new ECU for Ford Fiesta 2004 - IM6 - 25-11-2018 If you must be do parameter reset you need login on PTS (PATS) New soft IDS only work |