Diagnostic BMW E46 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Diagnostic BMW E46 (/showthread.php?tid=36808) |
Diagnostic BMW E46 - AC31991 - 28-06-2018 Hello at all. I have a problem with the diagnostic at my e46 construction year 09.2001. OS: Windows 10 Pro Software: Ista 4.10.20, EDIABAS 7.3.0, NODE voltage control tool, EDIABAS configuration tool Hardware: K+D-Can cable Com Port is set on com2 and the waittime on 1ms obd.ini is set on com2 ediabas.ini is set on STD:OBD via ediabasconfigurator and i tried it manually cabledriver is installed ista vci config is set on ediabas if i start the diagnostic via ista i became the error that ista cant find my car respectively i should activate pad mode. Node Voltagecontrol is working and the voltage is displayed on the right corner in ista. is it possible that i need an pin 7 pin 8 connector for this car? Inpa on my virtual windows xp machine with this settings and the same cable is working. I hope someone can help me. Best regards RE: Diagnostic BMW E46 - Bimmer540 - 28-06-2018 (28-06-2018, 11:09 AM)AC31991 Wrote: Hello at all. Yes, you need pin 7 pin 8 connector for this car! Or solder pin 7 and 8 together. Can you read modules with the cables in Inpa, or only see 2 black dots? RE: Diagnostic BMW E46 - AC31991 - 29-06-2018 (28-06-2018, 11:52 AM)snypertje Wrote:(28-06-2018, 11:09 AM)AC31991 Wrote: Hello at all. Thanks for your answer. Today i used a pin 7 pin 8 connector and it works. In Inpa it works. I have a question about that. Is there a list for car where you have to use the connector or is it different for each car? Best regards. RE: Diagnostic BMW E46 - Bimmer540 - 29-06-2018 Incl adapter 2000 until +/- 2005 Whitout +/- 2005 until 2010 RE: Diagnostic BMW E46 - Enabled - 29-06-2018 (29-06-2018, 16:27 PM)snypertje Wrote: Incl adapter 2000 until +/- 2005 ~01/2007 - 02/2007 RE: Diagnostic BMW E46 - starML - 29-06-2018 Here is a chart that will help understand which connector is needed for what car. Including whether pin 8 needs to be enabled or not. So in practice Cars that do not have CIC use a cable with interconnected pins, On CIC cars, they used a pin with pinned cables. For example, the E60 offers both options according to the year. |