+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Magnetti marelli IAW 6LP1.08 IMMO OFF (/showthread.php?tid=3683)
Magnetti marelli IAW 6LP1.08 IMMO OFF - TAISHO6666 - 13-04-2014
HI EVERY BODY
Magnetti marelli IAW 6LP1.08 IMMO OFF NEEDED PL NOT AUTOCODING
ALL IMMO PROGRAMS DO AUTOCODING FOR THAT ECU AND DO NOT REMOVE IMMO
WHICH PROGRAM CAN REMOVE IMMO COPLETELY
I TRIED,IMMO UNIVERSAL DECODING, IMMO TOOL,IMMO KILLER,MEUCCI,OTOCHECK
IF SOME BODY HAVE DUMP FOR Magnetti marelli IAW 6LP1.08 IMMO OFF
CAN POSTED PL?
IF NOT I WILL USE XPROGM-M TO READ ST10F280 MCU AND POST DUMP SO ANY BODY CAN HELP ME TO COMPLETELY REMOVE IMMO
QUESTIONS
1-IF I DO AUTOCODING (VIRGIN IMMO) CAN I USE JUST METAL KEY WITHOUT TRANSPANDER TO START THE CAR?
2-CAN I USE THIS ECU TO START PEUGOET 407 2000 CC GASOLINE?
3- DIFFERENT ENGINE CC DOES MAKE ANY PROBLEM?
4-XPROG-M SHOW ME CONNECTION DIAGRAM FOR IAW 6LPA.01 (ST10F280) BUT THERE IS NO CONNECTION DIAGRAM FOR IAW 6LP1.08
(ST10F280) AND WHEN I OPEPEND THE ECU THE CIRCUIT FROM THE BOTTOM EXACTLLY THE SAME SO I CAN USE THAT CONNECTION?
5_ WHAT IS THE BEST SOLUTION TO USE Magnetti marelli IAW 6LP1.08
TO START PEUGOET 407 2000 CC GASOLINE ?
THANK YOU FOR ANY HELP