CarTechnoloGY
Need tune edc16u34 03g906021lr - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Need tune edc16u34 03g906021lr (/showthread.php?tid=37377)



need tune edc16u34 03g906021lr - senatormog - 14-07-2018

Please help with the block edc16u34 03g906021LR software 382088. i need help with a chip up to 140lc egr off hot start. I will also be grateful for the activation of gra hi. thanks


RE: Need tune edc16u34 03g906021lr - cronors03 - 15-07-2018

your file ori with egr off + hot start


RE: Need tune edc16u34 03g906021lr - sandor1987 - 15-07-2018

Here you have tested file!

140HP 330 - 340NM
EGR OFF and Hotstart fix

pass PM


RE: Need tune edc16u34 03g906021lr - senatormog - 17-07-2018

(15-07-2018, 07:30 AM)cronors03 Wrote:  your file ori with egr off + hot start

thank you the car is going well. but there was an error p0684. before making corrections, this error was not. please check


RE: Need tune edc16u34 03g906021lr - cronors03 - 17-07-2018

(17-07-2018, 13:47 PM)senatormog Wrote:  [quote='cronors03' pid='355490' dateline='1531639859']
your file ori with egr off + hot start

thank you the car is going well. but there was an error p0684. before making corrections, this error was not. please check

that is a tested file.
do you have corrected cecksum in write with your tool ?

Faulty Glow Plug Control Module (GPCM)
GPCM harness is open or shorted
GPCM circuit poor electrical connection
Faulty Engine Control Module (ECM)


RE: Need tune edc16u34 03g906021lr - senatormog - 17-07-2018

(17-07-2018, 15:23 PM)cronors03 Wrote:  
(17-07-2018, 13:47 PM)senatormog Wrote:  [quote='cronors03' pid='355490' dateline='1531639859']
your file ori with egr off + hot start

thank you the car is going well. but there was an error p0684. before making corrections, this error was not. please check

that is a tested file.
do you have corrected cecksum in write with your tool ?

Faulty Glow Plug Control Module (GPCM)
GPCM harness is open or shorted
GPCM circuit poor electrical connection
Faulty Engine Control Module (ECM)
Of course, I checked the amount. When I fill in ori firmware, without any corrections, the error goes away.


RE: Need tune edc16u34 03g906021lr - gafari - 17-07-2018

egr off + hot start p0684 off


RE: Need tune edc16u34 03g906021lr - senatormog - 18-07-2018

(17-07-2018, 20:37 PM)gafari Wrote:  egr off + hot start p0684 off
I would like the system to remain in operation. and this error is probably due to incorrect software disconnection of the program or hot start.


RE: Need tune edc16u34 03g906021lr - cronors03 - 19-07-2018

(17-07-2018, 19:25 PM)senatormog Wrote:  
(17-07-2018, 15:23 PM)cronors03 Wrote:  
(17-07-2018, 13:47 PM)senatormog Wrote:  [quote='cronors03' pid='355490' dateline='1531639859']
your file ori with egr off + hot start

thank you the car is going well. but there was an error p0684. before making corrections, this error was not. please check

that is a tested file.
do you have corrected cecksum in write with your tool ?

Faulty Glow Plug Control Module (GPCM)
GPCM harness is open or shorted
GPCM circuit poor electrical connection
Faulty Engine Control Module (ECM)
Of course, I checked the amount. When I fill in ori firmware, without any corrections, the error goes away.

try this other file and report