+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Yanhua mini ACDP programming tool (/showthread.php?tid=37697)
Yanhua mini ACDP programming tool - koziol - 25-07-2018
any news about Yanhua mini ACDP?
is it worth to buy ?
RE: Yanhua mini ACDP programming tool - Chriz - 04-08-2018
I got it since a week and i am excited
M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder)
Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps)
Tried several CAS4 to Read with out any problems, Mileage reset works too
CAS3 tested only 1 but readed without problem
On a nother group they reported to create succesfully keys on FEM/BDC and CAS4
RE: Yanhua mini ACDP programming tool - srki7 - 05-08-2018
I have baught form Eobdtool.co.uk - and have Problem wtih Authorization.
Support is very bad.
one week ago and don get a Authorization
cant work wihtaut a Autohrizatin - every modul tha you bay must have extre a authorizaiton from your selller.
RE: Yanhua mini ACDP programming tool - Chriz - 06-08-2018
Got a authorization problem too, but it was solved after 12-16 hours (only one authorization was missing)
Bought it direct from yanhua
Support is over WhatsApp and so far very quick
I will PM you number from my supporter
Did you Updated your authorization after initial setup?
RE: Yanhua mini ACDP programming tool - Tombo - 22-08-2018
Has anyone installed it on pc?
RE: Yanhua mini ACDP programming tool - koziol - 23-08-2018
so whats the best place to buy it ?
RE: Yanhua mini ACDP programming tool - Tombo - 23-08-2018
I bought it from ebay. Anywhere, just find good price
RE: Yanhua mini ACDP programming tool - koziol - 23-08-2018
are you using it everyday ,can you count on it?
RE: Yanhua mini ACDP programming tool - Tombo - 27-08-2018
I just get it.
Reading eprom cas4 and make a key for f11 so far done.
Cant say much more.
cas4 reading eprom compared with vvdi reading and its matching 100%
RE: Yanhua mini ACDP programming tool - Gatsby79 - 30-08-2018
nobody tested it on FEM/BDC with isn or key make?
does it will erase 35160,35080 eeprom?