+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ BMW E60 clone ecu (/showthread.php?tid=37884)
Pages:
1
2
BMW E60 clone ecu - crackos20 - 31-07-2018
Let's see if anyone can help me, tried to clone ecu bmw e60 2004 engine 3.0d with the reference HW 0281011224 SW 1037361875 07795427 OHTER ecu the same number of pieces, I could clone only eeprom and flash, micro gives me error to clone
Any one can help to transfer immo data (ISN) from Original to donor ecu?????
RE: BMW E60 clone ecu - raffy haddad - 31-07-2018
hello i think you need just flas and eeprom
no need for micro
my opinion
regards
RE: BMW E60 clone ecu - crackos20 - 31-07-2018
(31-07-2018, 12:08 PM)raffy haddad Wrote: hello i think you need just flas and eeprom
no need for micro
my opinion
regards
Any other ideas?
RE: BMW E60 clone ecu - miniveho94 - 31-07-2018
You dont need copy mpc, If you can copy eeprom and flash its working.
RE: BMW E60 clone ecu - dijo - 31-07-2018
(31-07-2018, 11:34 AM)crackos20 Wrote: Let's see if anyone can help me, tried to clone ecu bmw e60 2004 engine 3.0d with the reference HW 0281011224 SW 1037361875 07795427 OHTER ecu the same number of pieces, I could clone only eeprom and flash, micro gives me error to clone
Any one can help to transfer immo data (ISN) from Original to donor ecu?????
only eeprom is needed...
swap it over or post here both eeprom...
RE: BMW E60 clone ecu - elektronik13 - 01-08-2018
(31-07-2018, 11:34 AM)crackos20 Wrote: Let's see if anyone can help me, tried to clone ecu bmw e60 2004 engine 3.0d with the reference HW 0281011224 SW 1037361875 07795427 OHTER ecu the same number of pieces, I could clone only eeprom and flash, micro gives me error to cloneecu new synchro ok start car
Any one can help to transfer immo data (ISN) from Original to donor ecu?????
press buttons
RE: BMW E60 clone ecu - miniveho94 - 01-08-2018
Why renew ecu, If can read original eeprom and write that? Best and easy way.
RE: BMW E60 clone ecu - zoro1 - 01-08-2018
what tool are you using to read original ecu?I made edc16c1 with galleto v48 try BDM port with no problem.I made pictures ,but i lost data from HDD
RE: BMW E60 clone ecu - crackos20 - 01-08-2018
i read with Ktag 7.020
Original ecu no connect with can line, car not work fine
i change ecu donate from other car but not engine start
RE: BMW E60 clone ecu - raffy haddad - 01-08-2018
swap eeprom as members told you and try it
regards