BMW Icom A2 repair - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW Icom A2 repair (/showthread.php?tid=37989) |
BMW Icom A2 repair - Bimmer540 - 03-08-2018 How to fix Icom A2 Clone with all red leds? RE: BMW Icom A2 repair - ferrum - 03-08-2018 This indicates that mega16 does not start. The reason is in poor soldering or its malfunction. RE: BMW Icom A2 repair - georgia55 - 03-08-2018 (03-08-2018, 09:23 AM)ferrum Wrote: This indicates that mega16 does not start. The reason is in poor soldering or its malfunction. @ferrum can you fix it too? RE: BMW Icom A2 repair - ferrum - 03-08-2018 There is a bad soldering. If mega16 is dead, then a donor is needed. A new mega16 is not something to flash, the firmware is locked. RE: BMW Icom A2 repair - peeluoff - 10-08-2018 My ICOM A2 flashes ONCE and only Once , when I connect it to my OBD in my car . This just started a day ago. Does this mean my ICOM A2 is locked ? Can it be reset ? If so, what's the Procedure? Thanks for any information you may have... RE: BMW Icom A2 repair - Vojno - 10-08-2018 (03-08-2018, 14:55 PM)ferrum Wrote: There is a bad soldering. Hi Ferrum! My ICOM-m LED's brightness is not very strong, as if it had been changed in this picture, but exactly what kind of typing? But ICOM-B has very low brightness LEDs too. RE: BMW Icom A2 repair - TomZX - 11-08-2018 (10-08-2018, 14:59 PM)peeluoff Wrote: My ICOM A2 flashes ONCE and only Once , when I connect it to my OBD in my car . This just started a day ago. Does this mean my ICOM A2 is locked ? Can it be reset ? If so, what's the Procedure? Thanks for any information you may have... Hi, Same Problem here. All LEDs flashing red only once, then it seems dead except the fan inside. Also no reaction to USB Restore. Any solution? Regards,t Tom RE: BMW Icom A2 repair - TomZX - 13-08-2018 Hello, I've found a solution for my LEDs "All Flashing RED Once". It is quite funny but I tried a reflow myself. Just removed central the PCB and put it in my oven for about 10 minutes at 200 deg. celsius (preheated). After that let cool down, reconnect to LAN-PCB an OBD and it worked. Maybe someone else can solve it this way too. But: I'm not responsible for any damage. Do this at your own risk! Regards, Tom RE: BMW Icom A2 repair - Silva1337 - 13-08-2018 any way to fix most adapter led brightness? RE: BMW Icom A2 repair - Vojno - 13-08-2018 (13-08-2018, 12:33 PM)Silva1337 Wrote: any way to fix most adapter led brightness? I'm also waiting the solutions! |